[arm-allstar] HamVoip audio defaults

[David McGough]

Hi Kevin,

Yes, that's correct for the simpleusb channel driver.

73, David K4FXC


On Thu, 9 Nov 2023, Kevin Custer via ARM-allstar wrote:

> David,
> 
> Can I assume that with HV, all TX audio is duplicated on both TXA and 
> TXB as well as the levels being identical?
> 
> Kevin
> 
> 
> 
> On 11/9/2023 2:20 AM, David McGough via ARM-allstar wrote:
> >
> > Hi Bob,
> >
> > The RX/TX-A/TX-B levels are all 500 by default.  TX DSP is 999 and RX
> > Boost is enabled.  Here are the default values from the stock
> > simpleusb.conf file:
> >
> > ;-----------------------------------------------------------------------------
> > [general]
> >
> > [usb]
> >
> > eeprom=0
> > rxboost=1               ; 0 = 20db attenuator inserted, 1= 20db attenuator
> > removed
> > carrierfrom=usbinvert   ; no,usb,usbinvert
> > ctcssfrom=no            ; no,usb,usbinvert
> > invertptt=0             ; Invert PTT 0 = ground to transmit, 1 = open to transmit
> > plfilter=yes            ; enable PL filter
> > ;deemphasis=yes         ; enable de-emphasis (input from discriminator)
> > ;preemphasis=yes        ; enable pre-emphasis (output to TX)
> > ;rxaudiodelay=0         ; rx audio delay for squelch tail elimination.
> >
> > ; Uncomment and configure following lines for second USB node
> > ;[usb1]
> >
> > ;eeprom=0
> > ;rxboost=1               ; 0 = 20db attenuator inserted, 1= 20db attenuator removed
> > ;carrierfrom=usbinvert   ; no,usb,usbinvert
> > ;ctcssfrom=no            ; no,usb,usbinvert
> > ;invertptt=0             ; Invert PTT 0 = ground to transmit, 1 = open to transmit
> > plfilter=yes             ; enable PL filter
> > ;deemphasis=yes          ; enable de-emphasis (input from discriminator)
> > ;-----------------------------------------------------------------------------
> >
> >
> > 73, David K4FXC
> >
> >
> >
> >
> >
> > On Wed, 8 Nov 2023, Jah Rastafari via ARM-allstar wrote:
> >
> >> Can someone please remind me what the SimpleUSB Audio Level defaults are in
> >> ham VoIP? Not asking for help setting them, I just need to be reminded what
> >> the the default installed settings are. Thanks.
> >>
> >> Bob
> >> KK6RQ
> >>
> >> ps. RX/TX-A/TX-B/Level Method/TX DSP/RX Boost, etc...
> >> _______________________________________________
> >>
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >>
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>