[arm-allstar] HamVoip audio defaults

[David McGough]

Hi Bob,

The RX/TX-A/TX-B levels are all 500 by default.  TX DSP is 999 and RX 
Boost is enabled.  Here are the default values from the stock 
simpleusb.conf file:

;-----------------------------------------------------------------------------
[general]

[usb]

eeprom=0
rxboost=1               ; 0 = 20db attenuator inserted, 1= 20db attenuator 
removed
carrierfrom=usbinvert   ; no,usb,usbinvert
ctcssfrom=no            ; no,usb,usbinvert
invertptt=0             ; Invert PTT 0 = ground to transmit, 1 = open to transmit
plfilter=yes            ; enable PL filter
;deemphasis=yes         ; enable de-emphasis (input from discriminator)
;preemphasis=yes        ; enable pre-emphasis (output to TX)
;rxaudiodelay=0         ; rx audio delay for squelch tail elimination. 

; Uncomment and configure following lines for second USB node
;[usb1]

;eeprom=0
;rxboost=1               ; 0 = 20db attenuator inserted, 1= 20db attenuator removed
;carrierfrom=usbinvert   ; no,usb,usbinvert
;ctcssfrom=no            ; no,usb,usbinvert
;invertptt=0             ; Invert PTT 0 = ground to transmit, 1 = open to transmit
plfilter=yes             ; enable PL filter
;deemphasis=yes          ; enable de-emphasis (input from discriminator)
;-----------------------------------------------------------------------------


73, David K4FXC





On Wed, 8 Nov 2023, Jah Rastafari via ARM-allstar wrote:

> Can someone please remind me what the SimpleUSB Audio Level defaults are in
> ham VoIP? Not asking for help setting them, I just need to be reminded what
> the the default installed settings are. Thanks.
> 
> Bob
> KK6RQ
> 
> ps. RX/TX-A/TX-B/Level Method/TX DSP/RX Boost, etc...
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>