[arm-allstar] Linux log

[Sandy]

David,

I am using the 3amp wall wart. Same as supplied with the Shari kits.
I replaced the RPi4 with another RPi 4. In fact just swapped the sd card 
into the
replacement and it booted up just fine.
A check of the log reveals nothing about overloaded usb-ports.
This is the second RPi4 that I have had problems with the usb-ports.
The first one was an 8gb Pi4. The usb-ports quit working altogether.
I had a keyboard and mouse pugged in.

73,



Sandy - w9sbe




------ Original Message ------
From: "David McGough via ARM-allstar" <arm-allstar at hamvoip.org>
To: "David McGough via ARM-allstar" <arm-allstar at hamvoip.org>
Cc: "David McGough" <kb4fxc at inttek.net>
Sent: 3/12/2023 9:41:57 PM
Subject: Re: [arm-allstar] Linux log

>
>Hi Sandy,
>
>I just saw this message and forwarded it to the arm-allstar list.  The
>original posting To: address was wrong (see original message, below).
>
>With nothing connected to any USB ports on your RPi4B, those are
>definitely strange messages!
>
>How are you powering the RPi4B (what type power supply, how is it
>attached to the RPi)?    Have you tried a different power supply?
>
>
>73, David K4FXC
>
>
>
>
>On Sun, 12 Mar 2023, David McGough via ARM-allstar wrote:
>
>>
>>
>>  -------------------------------------------------------------------------------------
>>  Date: Sat, 11 Mar 2023 17:13:53 +0000
>>  From: Sandy <w9sbe at comcast.net>
>>  To: ARM-allstar <arm-allstar-bounces at hamvoip.org>
>>  Subject: Linux log
>>
>>
>>  Hi,
>>  I am having a problem with my Hamvoip Hub.
>>  It randomly disconnects all connections.
>>  It doesn't reboot. It just looses connection it seems.
>>  The Linux log shows that I have an over-current on usb ports?
>>
>>  Mar 11 11:00:06 43628 kernel: usb 1-1-port1: over-current change #1334522
>>  Mar 11 11:00:06 43628 kernel: usb usb2-port2: over-current change #1334258
>>  Mar 11 11:00:06 43628 kernel: usb 1-1-port2: over-current change #1332808
>>  Mar 11 11:00:07 43628 kernel: usb usb2-port3: over-current change #1334258
>>  Mar 11 11:00:07 43628 kernel: usb 1-1-port3: over-current change #1333286
>>  Mar 11 11:00:07 43628 kernel: usb usb2-port4: over-current change #1334258
>>  Mar 11 11:00:07 43628 kernel: usb 1-1-port4: over-current change #1335670
>>  Mar 11 11:00:07 43628 kernel: usb usb2-port4: over-current condition
>>  Mar 11 11:00:07 43628 kernel: usb usb2-port1: over-current change #1334259
>>  Mar 11 11:00:07 43628 kernel: usb 1-1-port1: over-current change #1334523
>>  Mar 11 11:00:07 43628 kernel: usb usb2-port2: over-current change #1334259
>>  Mar 11 11:00:07 43628 kernel: usb 1-1-port2: over-current change #1332809
>>  Mar 11 11:00:08 43628 kernel: usb usb2-port3: over-current change #1334259
>>  Mar 11 11:00:08 43628 kernel: usb 1-1-port3: over-current change #1333287
>>  Mar 11 11:00:08 43628 kernel: usb usb2-port4: over-current change #1334259
>>  Mar 11 11:00:08 43628 kernel: usb 1-1-port4: over-current change #1335671
>>  Mar 11 11:00:08 43628 kernel: usb usb2-port4: over-current condition
>>  Mar 11 11:00:08 43628 kernel: usb usb2-port1: over-current change #1334260
>>  Mar 11 11:00:08 43628 kernel: usb 1-1-port1: over-current change #1334524
>>
>>
>>  I do not have anything connected to any usb ports (using as a hub)
>>  The RPI is a Pi4.
>>
>>  Thanks,
>>
>>  73,
>>
>>
>>
>>  Sandy - w9sbe
>>
>>
>>
>>  _______________________________________________
>>
>>  ARM-allstar mailing list
>>ARM-allstar at hamvoip.org
>>http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>>  Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>
>
>_______________________________________________
>
>ARM-allstar mailing list
>ARM-allstar at hamvoip.org
>http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>Visit the BBB and RPi2/3/4 web page - http://hamvoip.org


-- 
This email has been checked for viruses by AVG antivirus software.
www.avg.com