[arm-allstar] Turn Scheduler On and Off with * code

[David McGough]

Hi Earl,

There are several easy ways to accomplish what you're wanting to do.  
First, a few questions:

...Are you running the hamvoip-autosky package? 

...What is the whole command (from rpt.conf) that get run when you 
initiate a *925 sequence?


73, David K4FXC




On Sun, 5 Mar 2023, Earl Hassemer via ARM-allstar wrote:

> I have setup a *925 to play a skywarn activated message and that works good in Hamvoip software.
> 
> Now I would like to setup a schedule to play the skywarn activated message when I activate it with a *980 and play once every 10 minutes until I enter another *981 to stop the skywarn is activated message. 
> 
> I am not sure how to use Scheduler Enable COP 15 and Scheduler Disable COP 16 and have not been able to find much in searching the forum for the past years that I did the search in.
> 
> Maybe that is not even the best way to do it but I have been able to setup a macro 33 to play the message and I also was able to setup a schedule 33 to play at a certain time but not able to turn the schedule 33 on or off as I do not know how.
> 
> Is there anyone out there that knows how I can get this done.
> 
> Earl
> W9EJH
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>