[arm-allstar] Mobile nodes

[Ron WA2WWK]

The uv82 is my hand held portable, not the one in the node.  Thanks
anyway.  I think that the UHF could be my problem.  WA2WWK

On Thu, Mar 2, 2023 at 2:52 PM Tony Grigajtis via ARM-allstar <
arm-allstar at hamvoip.org> wrote:

> Ron,
> I think I read somewhere that the UV-82 needs to be on the B, 2nd or bottom
> section of the transceiver to function as an allstar node.
> I hope this helps.
>
> Tony, W2KJV
>
> On Thu, Mar 2, 2023 at 8:54 AM Ron WA2WWK via ARM-allstar <
> arm-allstar at hamvoip.org> wrote:
>
> > Thanks for your suggestions.  I found my problem which was my UV82.  For
> > some unknown reason, my radio stopped transmitting on some channels while
> > receiving was ok?  I did a reset all (40) which didn't  solve the
> > problem???  Not sure what is happening as only some frequencies work and
> > some won't work??  Thanks for the help.  WA2WWK Ron
> >
> > On Mon, Feb 27, 2023 at 2:55 PM Robert Forest via ARM-allstar <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > This is an issue I have been looking at also. I have another node on
> the
> > > same network and when I select the second node on Supermon I get a
> > message
> > > saying "Could not connect to Asterisk Manager" HELP! Please and thank
> you
> > >
> > > Robert
> > > K4VL
> > >
> > >
> > > On Mon, Feb 27, 2023 at 1:05 PM David McGough via ARM-allstar <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > >
> > > > Hi Ron,
> > > >
> > > > Check your /srv/http/supermon/allmon.ini file and make sure the IP
> > > address
> > > > and credentials are the same for both of your nodes, since they're on
> > the
> > > > same RPi.
> > > >
> > > >
> > > > 73, David K4FXC
> > > >
> > > >
> > > >
> > > >
> > > > On Mon, 27 Feb 2023, Ron WA2WWK via ARM-allstar wrote:
> > > >
> > > > > Good morning all.  I've been running 2 nodes in the mobile (1 wired
> > > > > radio-less, 1 radio) on the same pie.  Recently I changed
> telephones
> > > and
> > > > > now after reprogramming the new cell & password only the radio node
> > > > works.
> > > > > The radioless node  does not show on the supermon but the connect
> > tones
> > > > are
> > > > > working properly indicating proper connection.. Any ideas???
> Thanks,
> > > > > WA2WWK Ron
> > > > > _______________________________________________
> > > > >
> > > > > ARM-allstar mailing list
> > > > > ARM-allstar at hamvoip.org
> > > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > >
> > > > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > > > >
> > > >
> > > > _______________________________________________
> > > >
> > > > ARM-allstar mailing list
> > > > ARM-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > > >
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>