[arm-allstar] LAN

[James R Sawyer]

Correct.
I do have the correct ip etc  I will be into linto the setup at the switch.
I haven’t until I know that LAN doesn’t meet port forwarding.👍    I will share the results 
Thanks


Sent from AT&T Yahoo Mail for iPhone


On Monday, June 12, 2023, 07:08, Mark Scrano <k2exe at k2exe.com> wrote:

Can you share your current configuration file? You said you have the private LAN IP addresses listed in the stanza for those nodes? That's the key to making sure the node looks locally instead of to the internet.73,K2EXE
On Jun 12, 2023 09:32, James R Sawyer via ARM-allstar <arm-allstar at hamvoip.org> wrote:


I did do that under the nodes stanza rpt 
ok on LAN and router   👍✅


Sent from AT&T Yahoo Mail for iPhone


On Monday, June 12, 2023, 00:08, Benjamin Naber via ARM-allstar <arm-allstar at hamvoip.org> wrote:

Allstar nodes on an internal LAN should not being going through a router to
connect to each other.

If each of the nodes are on different ports, then those port number need to
be on the opposite nodes rpt.conf

On Sun, Jun 11, 2023, 10:14 kg5rdf via ARM-allstar <arm-allstar at hamvoip.org>
wrote:

>  I am assuming your not using gmrslive image correct?
> -------- Original message --------From: James R Sawyer via ARM-allstar <
> arm-allstar at hamvoip.org> Date: 6/11/23  9:57 AM  (GMT-06:00) To: Scott
> Hughes <n4upc at pm.me>, arm-allstar at hamvoip.org Cc: James R Sawyer <
> jrcasawyer at sbcglobal.net> Subject: Re: [arm-allstar] LAN I did follow the
> set of instructions it still isn’t working.I have all ports  listed for
> port forwarding in the modem setupIax ssh http  astrick ports  Each node
> has its own port numbers Still doesn’t workJimSent from AT&T Yahoo Mail for
> iPhoneOn Saturday, June 10, 2023, 07:32, Scott Hughes <n4upc at pm.me>
> wrote: https://hamvoip.org/howto/multi-server-howto.pdf73,ScottN4UPCHSH
> #: 11648 HOIP#: 100481  On Sat, Jun 10, 2023 at 09:06, James R Sawyer via
> ARM-allstar <arm-allstar at hamvoip.org> wrote: I have two nodes on the same
> LAN and can not connect them to each other. I can connect to node outside
> of my LAN (WAN).I have checked 4times now on the port forwarding for both
> nodes. Check that all the nodes are or have separate http SSh astrisk and
> IXA ports All are different. I was directed to inter a line in the rpt node
> stanza in both nodes. That didn’t worked.Is there anyone that has a
> correction or mode that will fix this issue?JimN6ZN Sent from AT&T Yahoo
> Mail for iPhone_______________________________________________ARM-allstar
> mailing listARM-allstar at hamvoip.orghttp://
> lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstarVisit the BBB and
> RPi2/3/4 web page -
> http://hamvoip.org_______________________________________________ARM-allstar
> mailing listARM-allstar at hamvoip.orghttp://
> lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstarVisit the BBB and
> RPi2/3/4 web page - http://hamvoip.org
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org



_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org