[arm-allstar] LAN

[Benjamin Naber]

Each node on the LAN will need to have the stanzas at the bottom of
rpt.conf that point to each node, and the LAN IP address.

I second the read up on the howto provided by the other gent

On Sat, Jun 10, 2023, 09:33 Scott Hughes via ARM-allstar <
arm-allstar at hamvoip.org> wrote:

> https://hamvoip.org/howto/multi-server-howto.pdf
>
> 73,
> Scott
> N4UPC
> HSH #: 11648
> HOIP#: 100481
>
> On Sat, Jun 10, 2023 at 09:06, James R Sawyer via ARM-allstar <[
> arm-allstar at hamvoip.org](mailto:On Sat, Jun 10, 2023 at 09:06, James R
> Sawyer via ARM-allstar <<a href=)> wrote:
>
> > I have two nodes on the same LAN and can not connect them to each other.
> I can connect to node outside of my LAN (WAN).
> > I have checked 4times now on the port forwarding for both nodes. Check
> that all the nodes are or have separate http SSh astrisk and IXA ports All
> are different.
> > I was directed to inter a line in the rpt node stanza in both nodes.
> That didn’t worked.
> > Is there anyone that has a correction or mode that will fix this issue?
> > JimN6ZN
> >
> > Sent from AT&T Yahoo Mail for iPhone
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>