[arm-allstar] Bridging to DMR

[Michael Webb]

https://dvswitch.groups.io/g/HamVoiP/wiki/29110

Join that group and follow the instructions:

Here are updated instructions for existing node.

Goto option 1: Perform a system UPDATE from the Admin Menu
Make a backup copy of your HamVoIP SD card. Make sure both copies work.

Go to option 9: Start Bash shell interface from the Admin Menu

Run:
bash <(curl -s http://dvswitch.org/hamvoip)

reboot

/usr/local/dvs/dvs
Do basic setup of DVSwitch

Type exit to return to the Admin Menu

Go to option 3: Change the primary NODE number from the Admin Menu

Keep all your existing settings and add a IAX password for use with
DVSwitch Mobile

You are set. DVSwitch-Server is connected to your private node 1999
The DVSwitch dashboard is at http://your.node.ip.address/dvswitch
Monit is at http://your.node.ip.address:2812 user = admin password = monit

Note:

If you are NOT using the default IAX UDP port (4569) You will need to edit
/etc/asterisk/rpt.conf
The example below uses UDP port 4553.

1234 = radio at 127.0.0.1:4553/1234,NONE

1999 = radio at 127.0.0.1:4553/1999,NONE

<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Virus-free.www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

On Sun, Aug 13, 2023 at 4:30 AM Glenn Morgon via ARM-allstar <
arm-allstar at hamvoip.org> wrote:

> Has anyone been successful in bridging to a DMR group (Brandmeister, TGIF,
> etc) from the HamVOIP Allstar?  I've seen instructions mentioning other
> flavors of Allstar which look to require compiling or installing from
> repositories other than HamVOIP.
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>