[arm-allstar] Local Inactivity Timer: Pros/Cons

Wed Apr 12 14:05:21 EDT 2023

Thanks Bill. I'll check that out..

-----Original Message-----
From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of Bill Paulus
via ARM-allstar
Sent: Wednesday, April 12, 2023 2:00 PM
To: 'ARM Allstar' <arm-allstar at hamvoip.org>
Cc: Bill Paulus <bpaulus at comcast.net>
Subject: Re: [arm-allstar] Local Inactivity Timer: Pros/Cons

Our club repeater connects to the Alaska Morning net every day and runs for
3 or 4 hrs. before it  disconnects but we use a script called Linkman that
will disconnect it if there are no key ups for 5 minutes in case it gets
done sooner. We use Linkman for most of the linked nets we use. I think it's
on GitHub 

Bill Paulus
KD2EOY
Allstar Node #526084
(609) 694-7976
Vice President SCARA
WWW.K2BR.COM
Southern Counties Amateur Radio Association

-----Original Message-----
From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of Chris via
ARM-allstar
Sent: Wednesday, April 12, 2023 12:17 PM
To: 'ARM Allstar' <arm-allstar at hamvoip.org>
Cc: ve3rwj at winsystem.org
Subject: [arm-allstar] Local Inactivity Timer: Pros/Cons

Hi.

I have a policy question.

This is as much about reassuring some people, as much as it is sensible
policy.

The club to which I belong is about to add an Allstar node to their 2 M
machine. I help maintain and configure the node.

Some people have expressed concerns about users connecting it to large
networks/busy nets, and it staying connected for long periods of time,
"tying up our repeater". (The fact that our repeater is quiet almost 24/7 is
immaterial)

I assure them that no, our repeater is not going to become one of those 24/7
Echolink rebroadcasters. Nets are fun but there is a limit, right?

I already script some automatic connections and disconnections, along with
spoken voice announcements warning of the impending connection. The
announcements play two minutes ahead.

And, I regularly ask which nets the membership would like to hear during the
week.

I also urge people to take the initiative if they want to disconnect from
something, by simply pushing PTT during a break in traffic and disconnect
using DTMF!

We've even changed the "disconnect all" command to *73 so it's easier to
remember.

And yet, some people are still concerned.

So, there is now talk of an inactivity timer for the Allstar node once it
joins the analog repeater.

What amount of local inactivity do people feel is sufficient to trigger an
automatic disconnect?

I'm thinking 30 minutes.

People can always reconnect if they want.

By "local" I mean no key ups from RF going into our node. Again, I'm not
sure if that level of control is possible. Inactivity might just be
inactivity across the node as a whole, in either direction.

Thoughts? Ideas? Things I may not have considered?

What happy  medium have you found for this?

All opinions welcome.

Thanks

Chris, ve3rwj

_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org

_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org