[arm-allstar] Runaway Audio on Receive - RepeaterPhone

Gary Ownsby gary at smoky.com
Tue Oct 11 22:31:10 EDT 2022 

Re: ARM-allstar Digest, Vol 101, Issue 11

I listened to the East Coast Reflector Tech Net tonight using RepeaterPhone
and the audio received often increased in volume...very loud.  I started
listening at a typical volume for the iPhone being about 18 inches from
me.  Even my wife sitting in another room noticed the change in volume off
and on during the course of the net.  Anyone else had this issue?

It starts at the volume I set but starts gradually increasing then when it
crescendos, the transmission stops and the next starts at normal volume.

Thanks.
Gary AK4ZX


On Tue, Oct 11, 2022 at 10:18 AM <arm-allstar-request at hamvoip.org> wrote:

> Send ARM-allstar mailing list submissions to
>         arm-allstar at hamvoip.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> or, via email, send a message with subject or body 'help' to
>         arm-allstar-request at hamvoip.org
>
> You can reach the person managing the list at
>         arm-allstar-owner at hamvoip.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of ARM-allstar digest..."
>
>
> Today's Topics:
>
>    1. Re: Talk on Allstar With Your iOS Device! (csmart8 at cogeco.ca)
>    2. RepeaterPhone: Allstar App for iOS (csmart8 at cogeco.ca)
>    3. Re: Auto Disconnect/connect scripts (Matt Holder)
>    4. Re: Talk on Allstar With Your iOS Device! (Patrick Perdue)
>    5. Re: RepeaterPhone: Allstar App for iOS (Patrick Perdue)
>    6. Re: Change Supermon connection status color (David McAnally)
>    7. Re: RepeaterPhone: Allstar App for iOS (Darrell Black)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 11 Oct 2022 08:21:51 -0400
> From: <csmart8 at cogeco.ca>
> To: "'ARM Allstar'" <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Talk on Allstar With Your iOS Device!
> Message-ID: <008001d8dd6c$0b2043e0$2160cba0$@cogeco.ca>
> Content-Type: text/plain;       charset="us-ascii"
>
> Yes, we know.
>
>
>
> -----Original Message-----
> From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Ken Arck
> via ARM-allstar"
> Sent: October 8, 2022 3:13 PM
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: Ken Arck <ken at arcomcontrollers.com>
> Subject: Re: [arm-allstar] Talk on Allstar With Your iOS Device!
>
> FWIW, there is already an Android ap for this. It's called DVSwitch Mobile
> and it's on Google Play
>
> https://play.google.com/store/apps/details?id=org.dvswitch&gl=US
>
>
> Ken, AH6LE
>
>
>
>
>
> At 11:31 AM 10/8/2022, you wrote:
> >It's only available for iOS at this time, Dave, but write to the
> >developer and see what the status is for Android implementation.
> >It's probably not too far off, but considering you guys already have
> >DVSwitch Mobile, then maybe not. RepeaterPhone Mobile does essentially
> >what DVSwitch does, and it acts like a Mac running Transceive to
> >Allstar. Yes, you log into the ASL site with your ASL credentials, and
> >when you connect to a node, it appears to others online as if you were
> >a Mac doing it.
> >
> >
> >On 10/8/2022 2:22 PM, "David McGough via ARM-allstar" wrote:
> >>Patrick,
> >>
> >>I don't have an IOS device.  I presume this new app has a way to enter
> >>an AllStar registration node number and password?  Does this app
> >>report to the ASL stats server?
> >>
> >>73, David K4FXC
> >>
> >>
> >>On Sat, 8 Oct 2022, "Patrick Perdue via ARM-allstar" wrote:
> >>
> >>>Just a tip for anyone using the app:
> >>>
> >>>If you have an iPhone XS or newer, you will have improved TX audio if
> >>>you change the microphone profile from "standard" to "wide spectrum."
> >>>This can be found in the iOS control center. Make sure you are
> >>>connected to a node first.
> >>>
> >>>_______________________________________________
> >>>
> >>>ARM-allstar mailing list
> >>>ARM-allstar at hamvoip.org
> >>>http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>
> >>>Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >>_______________________________________________
> >>
> >>ARM-allstar mailing list
> >>ARM-allstar at hamvoip.org
> >>http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >>Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >_______________________________________________
> >
> >ARM-allstar mailing list
> >ARM-allstar at hamvoip.org
> >http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> >Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
>
> ----------------------------------------------------------------------------
> --
> President and CTO - Arcom Controllers
> Makers of repeater controllers and accessories
> Phone: (503) 678 6182
> https://www.arcomcontrollers.com/
> Authorized Dealers for Kenwood and Telewave.
> We offer complete turn-key repeater packages!
> "We don't just make 'em. We use 'em!"
> []
>
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 11 Oct 2022 08:25:28 -0400
> From: <csmart8 at cogeco.ca>
> To: "'ARM Allstar'" <arm-allstar at hamvoip.org>
> Subject: [arm-allstar] RepeaterPhone: Allstar App for iOS
> Message-ID: <008301d8dd6c$8c82abd0$a5880370$@cogeco.ca>
> Content-Type: text/plain;       charset="us-ascii"
>
> Hi Larry.
>
> Does this app rely on using the "web-transcieve" portal?
>
> Only if that is how you want to connect.
>
> Can it connect directly to an AllStar node without using "web-transcieve",
> a
> la DVSwitch?
>
> Yes, absolutely.
>
> On the Favorites screen, click the "+" in the upper right corner. For
> Credentials, choose "Node" instead of "Account" and you will be able to
> enter your IAX username and password there. That's it.
>
> Chris
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 11 Oct 2022 12:45:56 +0000 (UTC)
> From: Matt Holder <ke0ncp at yahoo.com>
> To: Frans - J69DS van Santbrink <j69ds at hotmail.com>,  ARM Allstar
>         <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Auto Disconnect/connect scripts
> Message-ID: <819964289.127574.1665492356211 at mail.yahoo.com>
> Content-Type: text/plain; charset=UTF-8
>
> Got it. Thanks!
>
>
> Sent from Yahoo Mail for iPhone
>
>
> On Tuesday, October 11, 2022, 4:29 AM, Frans - J69DS van Santbrink <
> j69ds at hotmail.com> wrote:
>
> #yiv3887850530 P {margin-top:0;margin-bottom:0;}Hi Matt
> the way I do all my auto connects and disconnects is via cron.?
> First of I set up my macros in rpt config in the macros section/stanza
> [macrosNODE#], example:12=*73OTHERNODE *73MYNODE *73MYLOCALNODE#?????;
> Connect nodes
>
> Then on cron is use the following line to call that macro:10 08 * * 2,4
> /usr/sbin/asterisk -rx "rpt fun 51686 *512"
>
> so for all my connects disconnects etc I have entries in cron, I have
> tried to use the rpt.conf but that I never got it right on a couple of
> nodes. So I kept it to cron for control.
> Hope this helps you somewhat
>
> Frans van Santbrink,
>
> Amateur Radio Operator: J69DS - J62DX - J62YOTA - J64SLI - [PJ7PK]
>
>
> http://J69ds.dageekz.com
>
>
>
> From: ARM-allstar <arm-allstar-bounces at hamvoip.org> on behalf of "Matt
> Holder via ARM-allstar" <arm-allstar at hamvoip.org>
> Sent: Monday, October 10, 2022 11:15 AM
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: Matt Holder <ke0ncp at yahoo.com>
> Subject: [arm-allstar] Auto Disconnect/connect scripts?Hi all,
> I have been playing with some auto disconnect and connect scripts and for
> the life of me can not get anything to work. I am looking to first
> disconnect all nodes, then connect up two specific nodes. I understand the
> cronjob part but I think I am getting the script wrong.The path to the .sh
> file is in the cron below. I have chmod 750 the file and just cant get it
> to disconnect nodes or connect nodes. I am not getting an errors when I run
> the file.? Mu node number is where it says MYNODE and the nodes that I want
> to connect to are NODE1 and NODE2. Can anyone assist as to where I am going
> wrong?
> Thanks,Matt - ke0ncp
> # 42 22 * * 3 /etc/asterisk/local/autoDisco.sh#/usr/sbin/asterisk -rx "rpt
> fun MYNODE *76"/usr/sbin/asterisk -rx "rpt fun
> MYNODE?*73NODE1"/usr/sbin/asterisk -rx "rpt fun MYNODE?*73NODE2"
>
>
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
>
>
>
> ------------------------------
>
> Message: 4
> Date: Tue, 11 Oct 2022 09:15:06 -0400
> From: Patrick Perdue <borrisinabox at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Talk on Allstar With Your iOS Device!
> Message-ID: <7a53e717-2418-a99a-563b-a88f2c894e4e at gmail.com>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
> Does this app rely on using the "web-transcieve? portal?
>
> Web transceive is used for the authentication portion, I.E. the login.
> Thus, you use your Allstarlink.org credentials, not a node number. BTW,
> DVSM 2.0 also has WT mode as one of it's options. Hold down the D key to
> bring up a menu to setup/login with WT, or exit WT mode if you are
> already using it.
>
> When you authenticate Repeaterphone with your Allstarlink.org
> username/password, a token is downloaded to your device.
>
>
> Can it connect directly to an AllStar node without using
> "web-transcieve?, a la DVSwitch?
>
> When you connect to a node, it is peer-to-peer from your phone to the
> node, though it uses the allstar-public context, the same as used by Web
> Transceive, not like DVSM 2.0's node mode, which registers as a
> stand-alone node and uses the radio-secure context.
>
>
> HTH,'73
>
> N2DYI
>
>
>
> ------------------------------
>
> Message: 5
> Date: Tue, 11 Oct 2022 09:24:12 -0400
> From: Patrick Perdue <borrisinabox at gmail.com>
> To: ve3rwj via ARM-allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] RepeaterPhone: Allstar App for iOS
> Message-ID: <2950b2ef-8290-2eb7-dd6b-3c1c7d35d984 at gmail.com>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
> Just FYI:
>
> You still need to first authenticate with allstarlink.org in order to
> set up an IAX connection to a node in this way, and you can't override
> the caller ID. It is always set to your call.
>
> This is fine for it's intended purpose of amateur radio, but you should
> probably not go around connecting this to an existing GMRS node using
> iaxrpt credentials. It looks pretty suspicious if N2DYI is connected to
> WRQC647's node, and that will probably get you a really short trip to
> the ban list.
>
>
> On 10/11/2022 8:25 AM, "ve3rwj via ARM-allstar" wrote:
> > Hi Larry.
> >
> > Does this app rely on using the "web-transcieve" portal?
> >
> > Only if that is how you want to connect.
> >
> > Can it connect directly to an AllStar node without using
> "web-transcieve", a
> > la DVSwitch?
> >
> > Yes, absolutely.
> >
> > On the Favorites screen, click the "+" in the upper right corner. For
> > Credentials, choose "Node" instead of "Account" and you will be able to
> > enter your IAX username and password there. That's it.
> >
> > Chris
> >
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
>
> ------------------------------
>
> Message: 6
> Date: Tue, 11 Oct 2022 08:52:59 -0500
> From: David McAnally <david.mcanally at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Change Supermon connection status color
> Message-ID:
>         <
> CAKjWhqv+Qzcfpa0jzbsokCzyqKrnPB+mzadf4u-cdRY1M3kQiA at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Someone on https://groups.io/g/Supermon may be able to answer this
> question.
>
> David McAnally WD5M
>
>
>
> On Tue, Oct 11, 2022 at 12:12 AM "ab8pr.radio--- via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I am trying to change the color scheme in Supermon 7+ for when a COS
> signal
> > is detected.
> >
> > I cannot seem to find the right spot to make that change.
> >
> > Any help would be appreciated.
> >
> > Thanks.
> >
> >
> >
> > ________________
> >
> >
> >
> > Phil Ross, AB8PR
> >
> > ab8pr.radio at gmail.com <mailto:ab8pr.radio at gmail.com>
> >
> >
> >
> >
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
>
>
> ------------------------------
>
> Message: 7
> Date: Tue, 11 Oct 2022 10:13:05 -0400
> From: Darrell Black <gigahacker at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] RepeaterPhone: Allstar App for iOS
> Message-ID:
>         <CAC23xXCGG44teX3sE6c4qMtFqtDXUiXf=
> 0OScW-VGMW4Yg1wZw at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Can anyone point to a bluetooth PTT that has been tested with this app?
>
> On Tue, Oct 11, 2022 at 10:03 AM "Patrick Perdue via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Just FYI:
> >
> > You still need to first authenticate with allstarlink.org in order to
> > set up an IAX connection to a node in this way, and you can't override
> > the caller ID. It is always set to your call.
> >
> > This is fine for it's intended purpose of amateur radio, but you should
> > probably not go around connecting this to an existing GMRS node using
> > iaxrpt credentials. It looks pretty suspicious if N2DYI is connected to
> > WRQC647's node, and that will probably get you a really short trip to
> > the ban list.
> >
> >
> > On 10/11/2022 8:25 AM, "ve3rwj via ARM-allstar" wrote:
> > > Hi Larry.
> > >
> > > Does this app rely on using the "web-transcieve" portal?
> > >
> > > Only if that is how you want to connect.
> > >
> > > Can it connect directly to an AllStar node without using
> > "web-transcieve", a
> > > la DVSwitch?
> > >
> > > Yes, absolutely.
> > >
> > > On the Favorites screen, click the "+" in the upper right corner. For
> > > Credentials, choose "Node" instead of "Account" and you will be able to
> > > enter your IAX username and password there. That's it.
> > >
> > > Chris
> > >
> > >
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
>
>
> --
>
> Darrell Black ASM / AEC / AUXCOM
>
> (517) 917-2226
> GigaHacker at gmail.com
> http://www.linkedin.com/in/darrellblack
>
>
> 73 de W8DSB
> "In God we trust, all others we monitor"
>
> A.R.S. W8DSB
> GMRS WRDE739
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>
> ------------------------------
>
> End of ARM-allstar Digest, Vol 101, Issue 11
> ********************************************
>
>

More information about the ARM-allstar mailing list