[arm-allstar] How do I remove local node number from connect announcement

Thu May 12 20:34:57 EDT 2022

change the ascending and descending tones to a single beep and turn off
telemetry
and if you don't want unkey convermation then don't use the ct=
I see this doing exactly what you are wanting.
the responses to your question are really confusing but the only way to
reply is to the
original post so let me copy and paste my solution again, just remember the
length of typing in this response gets chopped so the script is corrupted
unless you follow my suggestion, it might be easier just to talk to you on
a node.

make changes in
etc/asterisk/rpt.conf

; Courtesy tone mapping

unlinkedct=ct21

linkunkeyct=ct20

; Misc. settings
;phonelinkdefault=1

connpgm=/usr/local/sbin/connpgm.sh ; Program or script to run at connection

discpgm=/usr/local/sbin/discpgm.sh ; Program or script to run at
disconnection

nounkeyct=0
; Disable courtest tones (=1)
holdofftelem=1
; Do not make announcements over user voice
telemdefault=0
; 0= voice telemetry off, 1= on,
; 2= Only your telemetry actions
; then mutes in 1 minute
telemenabled=255 ;needed for V1.7.0-1 upgrade for pseudo to work

now down in [telemetry]

[telemetry]
ct20=|m L
ct21=|m D
remotetx=|m K
remotemon=|m M

;now go to         /usr/local/sbin
edit connpgm.sh and you may have to chmod +x connpgm.sh when finished,
change 501521 to your node. the script line gets chopped in this email
so you need to have one complete line starting with asterisk -rx  and
finishing with 50", the line gets chopped at 48 and the next line
in this email starts with \!440   so put the both lines in
one line with a space between 48 and \!

#!/bin/bash
# play a tone on connect
asterisk -rx "rpt cmd 501521 cop 48
\!440/50,\!0/50,\!654/50,\!0/50,\!880/50"

now do the same for discpgm.sh

#!/bin/bash
# play a tone on disconnect
asterisk -rx "rpt cmd 501521 cop 48
\!880/50,\!0/50,\!654/50,\!0/50,\!440/50"

reboot, that's it, let me know how you make out
Dave
WA2KJC

On Thu, May 12, 2022 at 7:45 PM "austin grubbs via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> So I guess there's no way to do what I'm trying to do then?
>
> On Thu, May 12, 2022 at 6:58 AM "Dave Petrie via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > that is what happens when you use the info I sent, you will get the
> > ascending tone on a connection and descending tone on a disconnect.
> > the ct= cw beeps can just be left blank if you don't want them, turn off
> > telemetry and all you will hear is the tones for connect and disconnect.
> > look over the script and play. I am sure if you ask Patrick he has other
> > tone patterns to save you playing for hours, lots of choices.
> > relaxing, just like playnews is now that I modified and got rid of
> > annoyances from the broadcaster, this software is fun.
> >
> > On Thu, May 12, 2022 at 6:01 AM Ron WA2WWK <wa2wwk at gmail.com> wrote:
> >
> > > I'm using auto connect on my mobile node and would like to hear only a
> > > confirmation beep when connected and no words?  Any possibility this
> can
> > be
> > > done?  Thanks.  WA2WWK  Ron
> > >
> > > On Wed, May 11, 2022 at 5:23 PM "Dave Petrie via ARM-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > >> I forgot that the forum emails get cut for line length so here is the
> > >> attached files
> > >> or you can just add a space between 48 \   but keep the rest on the
> same
> > >> line.
> > >>
> > >>
> > >> On Wed, May 11, 2022 at 2:47 PM Lu Vencl <ka4eps at gmail.com> wrote:
> > >>
> > >> > Interesting. Can you share the script? I missed it.
> > >> >
> > >> > > On May 11, 2022, at 7:35 AM, Dave Petrie via ARM-allstar <
> > >> > arm-allstar at hamvoip.org> wrote:
> > >> > >
> > >> > > I like the ascending tone for someone connecting and descending
> > tone
> > >> > for a
> > >> > > disconnect from my node, with telemetry turned off, if I am
> curious
> > I
> > >> can
> > >> > > dtmf *70 for a voice announcement or I can log into supermon and
> > have
> > >> a
> > >> > > look. Thank You Patrick Perdue for those tones setup, I been using
> > >> them
> > >> > > ever since you shared the script. I also added ct=  for a cw K
> when
> > >> > > repeater unkeys locally, cw L for when a linked node unkeys, cw M
> > >> when I
> > >> > > have a node connected in Monitor mode, cw D when no nodes are
> > >> connected,
> > >> > cw
> > >> > > is a nice change from melodies.
> > >> > > Just adding my 2 cents.
> > >> > > Dave
> > >> > >
> > >> > >
> > >> > >> On Wed, May 11, 2022 at 5:13 AM "Patrick Perdue via ARM-allstar"
> <
> > >> > >> arm-allstar at hamvoip.org> wrote:
> > >> > >>
> > >> > >> Yep, but it would still say "connected to <whatever>" and
> > >> > >> "disconnected." So, different, but not quite a fix.
> > >> > >>
> > >> > >>
> > >> > >>> On 5/11/2022 4:12 AM, "Lu Vencl via ARM-allstar" wrote:
> > >> > >>> One work around would be to record a 10ms silent audio file and
> > >> plant
> > >> > it
> > >> > >> into the nodenames directory. That would stop Allison from
> speaking
> > >> your
> > >> > >> node number and just play the nothing file in place.
> > >> > >>> Lu
> > >> > >>> KA4EPS
> > >> > >>>
> > >> > >>>> On May 11, 2022, at 12:31 AM, David McGough via ARM-allstar <
> > >> > >> arm-allstar at hamvoip.org> wrote:
> > >> > >>>>
> > >> > >>>> 
> > >> > >>>> Hi Austin,
> > >> > >>>>
> > >> > >>>> No easy way to make this change currently, the connection
> related
> > >> > >>>> telemetry is hard-coded.
> > >> > >>>>
> > >> > >>>>
> > >> > >>>> 73, David K4FXC
> > >> > >>>>
> > >> > >>>>
> > >> > >>>>
> > >> > >>>>> On Tue, 10 May 2022, "austin grubbs via ARM-allstar" wrote:
> > >> > >>>>>
> > >> > >>>>> Hello,
> > >> > >>>>> Is there a way to prevent local node number from being
> announced
> > >> > >> during the
> > >> > >>>>> connect announcement
> > >> > >>>>> As in change it from: "Node number [incoming node number]
> > >> connected
> > >> > to
> > >> > >> node
> > >> > >>>>> number [LOCAL NODE NUMBER]" and make it just say "Node
> [incoming
> > >> node
> > >> > >>>>> number] connected"
> > >> > >>>>>
> > >> > >>>>> AC4AG
> > >> > >>>>> _______________________________________________
> > >> > >>>>>
> > >> > >>>>> ARM-allstar mailing list
> > >> > >>>>> ARM-allstar at hamvoip.org
> > >> > >>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >> > >>>>>
> > >> > >>>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >> > >>>>>
> > >> > >>>> _______________________________________________
> > >> > >>>>
> > >> > >>>> ARM-allstar mailing list
> > >> > >>>> ARM-allstar at hamvoip.org
> > >> > >>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >> > >>>>
> > >> > >>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >> > >>> _______________________________________________
> > >> > >>>
> > >> > >>> ARM-allstar mailing list
> > >> > >>> ARM-allstar at hamvoip.org
> > >> > >>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >> > >>>
> > >> > >>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >> > >> _______________________________________________
> > >> > >>
> > >> > >> ARM-allstar mailing list
> > >> > >> ARM-allstar at hamvoip.org
> > >> > >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >> > >>
> > >> > >> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >> > > _______________________________________________
> > >> > >
> > >> > > ARM-allstar mailing list
> > >> > > ARM-allstar at hamvoip.org
> > >> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >> > >
> > >> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >> >
> > >> _______________________________________________
> > >>
> > >> ARM-allstar mailing list
> > >> ARM-allstar at hamvoip.org
> > >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >>
> > >> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >
> > >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org