[arm-allstar] IRLP with hamvoip beware!!!!

[Jed Barton]

I left IRLP and don't miss it 1 bit.  Once you get to using allstar
audio, there's no going back.  Like everyone said, their garbage
hardware, it's not worth it.  I can do anything I need to with my
allstar node.


On 5/10/22, "Ken Arck via ARM-allstar" <arm-allstar at hamvoip.org> wrote:
>
> Totally acceptable to use it to connect to an IRLP reflector however...
>
> Ken
>
>
>
> At 11:37 AM 5/10/2022, you wrote:
>>I found out the hard way that IRLP on a hamvoip node is unacceptable
>>from the IRLP group and Dave Cameron.  They have software that
>>detects hamvoip IRLP nodes and the software removes the IRLP node
>>using hamvoip. The procedure to install IRLP on hamvoip should be
>>removed.  My IRLP node was old and they will not let me re-use my
>>old node number. I need to get a new node number and reinstall the
>>original IRLP software and use an IRLP board. So beware!!!!!!!! I
>>had no idea it was such a big deal for Dave and his group.
>>
>>Glenn WA7SPY
>>_______________________________________________
>>
>>ARM-allstar mailing list
>>ARM-allstar at hamvoip.org
>>http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>>Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
> ------------------------------------------------------------------------------
> President and CTO - Arcom Controllers
> Makers of repeater controllers and accessories
> Phone: (503) 678 6182
> https://www.arcomcontrollers.com/
> Authorized Dealers for Kenwood and Telewave.
> We offer complete turn-key repeater packages!
> "We don't just make 'em. We use 'em!"
> []
>
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>