[arm-allstar] Shutting down a node safely in a vehicle, need some input

[Dave Petrie]

in /etc/asterisk/rpt.conf  edit rpt.conf to uncomment the command to
shutdown the software so you can then turn off the power safely.
so in rpt.conf in the [functions????] your node in place of ???? like mine
is 40039
work you way down to the ;Example functions

[functions40039]
; Example functions to call scripts
; These are commented out. Remove ';' and change function
; command and node to your choice
; Note that halting the system remotely would require
; a power cycle to recover.

; Halt the system (linux total shutdown)
;B1=cmd,/usr/local/sbin/halt.sh 40039
 so just remove the ; semicolon in front of the B1
save and reboot to test, send a dtmf *B1




On Sat, Mar 26, 2022 at 4:34 PM "Jed Barton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hey guys,
>
> Hope all is going well.  So a friend of mine is putting together a
> node for his vehicle.  We're trying to figure out the best way to shut
> down the node safely.  Obviously just killing the power isn't the best
> idea.  Anyone done this, and are there options to make this work?
>
> Cheers,
>
> Jed
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>