[arm-allstar] ARM-allstar Digest, Vol 92, Issue 20
ku6v
ku6v at pacbell.net
Mon Jan 24 13:37:37 EST 2022
Howdy
Is this example showing a "new" stanza node [1234] or is the
phonesendlinks=1 statement added to the first node stanza?
> >> ;rpt.conf
> >> [1234]
> >> phonesendlinks=1
Sorry for the dumb question but I added this where I thought it should go in
rpt.conf and got stuck in a loop.
73,Don KU6V
-----Original Message-----
From: ARM-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
arm-allstar-request at hamvoip.org
Sent: Friday, January 21, 2022 8:50 AM
To: arm-allstar at hamvoip.org
Subject: ARM-allstar Digest, Vol 92, Issue 20
Send ARM-allstar mailing list submissions to
arm-allstar at hamvoip.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
or, via email, send a message with subject or body 'help' to
arm-allstar-request at hamvoip.org
You can reach the person managing the list at
arm-allstar-owner at hamvoip.org
When replying, please edit your Subject line so it is more specific than
"Re: Contents of ARM-allstar digest..."
Today's Topics:
1. Re: Post-update connection status at allstarlink, bubble
chart anomalies (Larry Mollica)
2. Re: Status Tab in DVSwitch Mobile App not working after v1.7
upgrade (Larry Mollica)
3. Re: Status Tab in DVSwitch Mobile App not working after v1.7
upgrade (David McGough)
4. Re: Status Tab in DVSwitch Mobile App not working after v1.7
upgrade (Larry Mollica)
5. Re: Hamvoip Motorola programming with dosbox (David McGough)
6. Fresh upgrade issue. (am_fm_radio at yahoo.com)
----------------------------------------------------------------------
Message: 1
Date: Thu, 20 Jan 2022 14:02:09 -0800
From: Larry Mollica <qjf5cqutzp at liamekaens.com>
To: ARM-allstar at hamvoip.org
Subject: Re: [arm-allstar] Post-update connection status at
allstarlink, bubble chart anomalies
Message-ID: <BC245C3B-8680-4FAF-B6DA-05B2D38F1DDD at liamekaens.com>
Content-Type: text/plain; charset=windows-1252
Just saw this. A quick check looks like has fixed the ?stuck? status of last
connection problem. So far so good.
Thanks
Larry
On Jan 19, 2022, at 11:41 AM, David McGough kb4fxc-at-inttek.net wrote:
>
> Larry,
>
> I just updated the hamvoip-asterisk package with a fix for this problem.
> Please update with admin menu option #1
>
>
> 73, David KB4FXC
>
>
>
>
> On Mon, 17 Jan 2022, "Larry Mollica via ARM-allstar" wrote:
>
>> Cool! Thanks for all your work.
>> LM
>>
>>
>> On Jan 17, 2022, at 12:18 PM, David McGough kb4fxc-at-inttek.net wrote:
>>
>>>
>>> Hi Larry,
>>>
>>> This anomalies has been reported. I've found a subtle optimization
>>> in
>>> V1.7.0-01 which seems to be the cause of this issue. It is related
>>> to how the data is reported to the ASL stats server. I've added a
>>> "hack" to resolve this issue. This update is being tested
>>> internally now, since it includes some other subtle fixes, too.
>>>
>>> This problem isn't related to the DVSwitch Mobile status info. The
>>> latest release (in testing) has a work-around to re-enable the
>>> DVSwitch info as well.
>>>
>>>
>>> Thanks for for feedback!
>>>
>>>
>>> 73, David KB4FXC
>>>
>>>
>>> On Mon, 17 Jan 2022, "Larry Mollica via ARM-allstar" wrote:
>>>
>>>> Hi
>>>>
>>>> I?m noticing that when I clear off the last connection on a node, the
connection is still shown as active on the allstarlink servers, both on the
status page (e.g. http://stats.allstarlink.org/nodeinfo.cgi?node=51846) and
on the bubble chart.
>>>>
>>>> That is:
>>>> Drop all connections on a given node, one of those connections (the
last one dropped) stills shows connected on the bubble chart.
>>>> Make a new, different connection on that node (other than to the one
incorrectly shown as connected), and the phantom connection will clear (but
then the new connection will not show cleared when dropped).
>>>>
>>>> Supermon and # asterisk -rx "rpt nodes 51846"
>>>> correctly show no connections when there are none.
>>>>
>>>> I have two servers updated to V1.7.0-01 both behaving this way. I have
two servers not updated, they do not exhibit this behavior.
>>>>
>>>>
>>>> I will also add that I?m seeing the DVSwitch Mobile ?status? tab
problem same as noted in this thread, perhaps related?
>>>> http://lists.hamvoip.org/pipermail/arm-allstar/2021-December/017271
>>>> .html
>>>>
>>>> Meanwhile the often intolerable snap-crackle-pops that I used to
>>>> frequently experience with DVSwitch Mobile seem to be reduced to
>>>> almost nothing, so that?s good thing. :)
>>>>
>>>> Thanks
>>>> Larry AD6G
>>>> _______________________________________________
>>>
>>
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>
>
------------------------------
Message: 2
Date: Thu, 20 Jan 2022 14:21:54 -0800
From: Larry Mollica <qjf5cqutzp at liamekaens.com>
To: ARM-allstar at hamvoip.org
Subject: Re: [arm-allstar] Status Tab in DVSwitch Mobile App not
working after v1.7 upgrade
Message-ID: <48E708FE-1967-41A6-8112-CCCC63E76784 at liamekaens.com>
Content-Type: text/plain; charset=windows-1252
DVSwitch Mobile now getting status populated.
However, connecting to a couple of hubs; for every node number that starts
with 5 (5xxx, 5xxxx), the Node Information field says ?Node information not
found?.
Nodes not staring with 5, the field looks normal.
Screenshot attached.
Larry
AD6G
On Jan 19, 2022, at 12:24 PM, Tim Jones via ARM-allstar
arm-allstar-at-hamvoip.org wrote:
> I just updated my node and rpt.conf. The Status tab is working again.
>
> Thanks!
> Tim
> KX4ZU
>
>> On 01/19/2022 3:00 PM David McGough via ARM-allstar
<arm-allstar at hamvoip.org> wrote:
>>
>>
>> Hi Everyone,
>>
>> I just updated the hamvoip-asterisk package. The update allows
>> linkslist data to be pushed to phonemode devices, such as is seen in
>> the Status Tab on the DVSwitch Mobile App. The feature is disabled,
>> by default. To re-enable, a minor update is needed in the rpt.conf
>> node stanza. For
>> example:
>>
>> ;rpt.conf
>> [1234]
>> phonesendlinks=1
>>
>>
>>
>> ....After making this change, perform and "rpt reload" or restart
>> asterisk.
>>
>>
>> 73, David KB4FXC
>>
>>
>>
>>
>> On Fri, 31 Dec 2021, "David McGough via ARM-allstar" wrote:
>>
>>>
>>> Hi Tim,
>>>
>>> I'll take a look at the DVSwitch Mobile app and try to duplicate
>>> this problem.
>>>
>>> 73, David KB4FXC
>>>
>>>
>>> On Fri, 31 Dec 2021, "Tim Jones via ARM-allstar" wrote:
>>>
>>>> Before the HamVOIP 1.7 upgrade, the Status tab on the DVSwitch Mobile
app would show all the connected nodes on the node which I was connected.
After the upgrade, the Status tab doesn't show anything. I confirmed this
by upgrading two separate nodes.
>>>>
>>>> The Status tab still works when I connect to an ASL node I have setup.
This is a minor issue. Everything else with the DVSwitch Mobile app appears
to work the same as pre-upgrade. However, it would be nice to get the
Status information to show up again.
>>>>
>>>> Any suggestions on how to get the Status tab working again?
>>>>
>>>> Thanks for your time.
>>>>
>>>> Tim
>>>> KX4ZU
>>>> _______________________________________________
>>>>
>>>> ARM-allstar mailing list
>>>> ARM-allstar at hamvoip.org
>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>>
>>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>>>
>>>
>>> _______________________________________________
>>>
>>> ARM-allstar mailing list
>>> ARM-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>
>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>>
>>
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
------------------------------
Message: 3
Date: Thu, 20 Jan 2022 21:34:39 -0500 (EST)
From: David McGough <kb4fxc at inttek.net>
To: "\"Larry Mollica via ARM-allstar\"" <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] Status Tab in DVSwitch Mobile App not
working after v1.7 upgrade
Message-ID:
<Pine.LNX.4.44.2201202129280.32491-100000 at goliath.inttek.net>
Content-Type: TEXT/PLAIN; charset=ISO-8859-1
Hi Larry,
Typically, a message like "Node information not found" indicates that the
astdb data is out of date and needs to be refreshed. I'm not sure how this
is handled in the DVSwitch Mobile app?? This is probably a question for the
DVSwitch groups.io list; I don't know the answer.
73, David KB4FXC
On Thu, 20 Jan 2022, "Larry Mollica via ARM-allstar" wrote:
> DVSwitch Mobile now getting status populated.
>
> However, connecting to a couple of hubs; for every node number that starts
with 5 (5xxx, 5xxxx), the Node Information field says ?Node information not
found?.
> Nodes not staring with 5, the field looks normal.
>
> Screenshot attached.
>
>
>
>
> Larry
> AD6G
>
>
> On Jan 19, 2022, at 12:24 PM, Tim Jones via ARM-allstar
arm-allstar-at-hamvoip.org wrote:
>
> > I just updated my node and rpt.conf. The Status tab is working again.
> >
> > Thanks!
> > Tim
> > KX4ZU
> >
> >> On 01/19/2022 3:00 PM David McGough via ARM-allstar
<arm-allstar at hamvoip.org> wrote:
> >>
> >>
> >> Hi Everyone,
> >>
> >> I just updated the hamvoip-asterisk package. The update allows
> >> linkslist data to be pushed to phonemode devices, such as is seen
> >> in the Status Tab on the DVSwitch Mobile App. The feature is
> >> disabled, by default. To re-enable, a minor update is needed in
> >> the rpt.conf node stanza. For
> >> example:
> >>
> >> ;rpt.conf
> >> [1234]
> >> phonesendlinks=1
> >>
> >>
> >>
> >> ....After making this change, perform and "rpt reload" or restart
> >> asterisk.
> >>
> >>
> >> 73, David KB4FXC
> >>
> >>
> >>
> >>
> >> On Fri, 31 Dec 2021, "David McGough via ARM-allstar" wrote:
> >>
> >>>
> >>> Hi Tim,
> >>>
> >>> I'll take a look at the DVSwitch Mobile app and try to duplicate
> >>> this problem.
> >>>
> >>> 73, David KB4FXC
> >>>
> >>>
> >>> On Fri, 31 Dec 2021, "Tim Jones via ARM-allstar" wrote:
> >>>
> >>>> Before the HamVOIP 1.7 upgrade, the Status tab on the DVSwitch Mobile
app would show all the connected nodes on the node which I was connected.
After the upgrade, the Status tab doesn't show anything. I confirmed this
by upgrading two separate nodes.
> >>>>
> >>>> The Status tab still works when I connect to an ASL node I have
setup. This is a minor issue. Everything else with the DVSwitch Mobile
app appears to work the same as pre-upgrade. However, it would be nice to
get the Status information to show up again.
> >>>>
> >>>> Any suggestions on how to get the Status tab working again?
> >>>>
> >>>> Thanks for your time.
> >>>>
> >>>> Tim
> >>>> KX4ZU
> >>>> _______________________________________________
> >>>>
> >>>> ARM-allstar mailing list
> >>>> ARM-allstar at hamvoip.org
> >>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>>
> >>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >>>>
> >>>
> >>> _______________________________________________
> >>>
> >>> ARM-allstar mailing list
> >>> ARM-allstar at hamvoip.org
> >>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>
> >>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >>>
> >>
> >> _______________________________________________
> >>
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
------------------------------
Message: 4
Date: Thu, 20 Jan 2022 19:06:15 -0800
From: Larry Mollica <qjf5cqutzp at liamekaens.com>
To: ARM-allstar at hamvoip.org
Subject: Re: [arm-allstar] Status Tab in DVSwitch Mobile App not
working after v1.7 upgrade
Message-ID: <1C497604-1E7A-43A3-BAF5-DFB930A8A7A2 at liamekaens.com>
Content-Type: text/plain; charset=windows-1252
Yeah, never mind. Getting the same thing on a V1.6.2-10 system. Should have
tried that earlier.
Thanks
On Jan 20, 2022, at 6:34 PM, David McGough kb4fxc-at-inttek.net wrote:
>
> Hi Larry,
>
>
> Typically, a message like "Node information not found" indicates that
> the astdb data is out of date and needs to be refreshed. I'm not sure
> how this is handled in the DVSwitch Mobile app?? This is probably a
> question for the DVSwitch groups.io list; I don't know the answer.
>
> 73, David KB4FXC
>
>
> On Thu, 20 Jan 2022, "Larry Mollica via ARM-allstar" wrote:
>
>> DVSwitch Mobile now getting status populated.
>>
>> However, connecting to a couple of hubs; for every node number that
starts with 5 (5xxx, 5xxxx), the Node Information field says ?Node
information not found?.
>> Nodes not staring with 5, the field looks normal.
>>
>> Screenshot attached.
>>
>>
>>
>>
>> Larry
>> AD6G
>>
>>
>> On Jan 19, 2022, at 12:24 PM, Tim Jones via ARM-allstar
arm-allstar-at-hamvoip.org wrote:
>>
>>> I just updated my node and rpt.conf. The Status tab is working again.
>>>
>>> Thanks!
>>> Tim
>>> KX4ZU
>>>
>>>> On 01/19/2022 3:00 PM David McGough via ARM-allstar
<arm-allstar at hamvoip.org> wrote:
>>>>
>>>>
>>>> Hi Everyone,
>>>>
>>>> I just updated the hamvoip-asterisk package. The update allows
>>>> linkslist data to be pushed to phonemode devices, such as is seen
>>>> in the Status Tab on the DVSwitch Mobile App. The feature is
>>>> disabled, by default. To re-enable, a minor update is needed in
>>>> the rpt.conf node stanza. For
>>>> example:
>>>>
>>>> ;rpt.conf
>>>> [1234]
>>>> phonesendlinks=1
>>>>
>>>>
>>>>
>>>> ....After making this change, perform and "rpt reload" or restart
>>>> asterisk.
>>>>
>>>>
>>>> 73, David KB4FXC
>>>>
>>>>
>>>>
>>>>
>>>> On Fri, 31 Dec 2021, "David McGough via ARM-allstar" wrote:
>>>>
>>>>>
>>>>> Hi Tim,
>>>>>
>>>>> I'll take a look at the DVSwitch Mobile app and try to duplicate
>>>>> this problem.
>>>>>
>>>>> 73, David KB4FXC
>>>>>
>>>>>
>>>>> On Fri, 31 Dec 2021, "Tim Jones via ARM-allstar" wrote:
>>>>>
>>>>>> Before the HamVOIP 1.7 upgrade, the Status tab on the DVSwitch Mobile
app would show all the connected nodes on the node which I was connected.
After the upgrade, the Status tab doesn't show anything. I confirmed this
by upgrading two separate nodes.
>>>>>>
>>>>>> The Status tab still works when I connect to an ASL node I have
setup. This is a minor issue. Everything else with the DVSwitch Mobile
app appears to work the same as pre-upgrade. However, it would be nice to
get the Status information to show up again.
>>>>>>
>>>>>> Any suggestions on how to get the Status tab working again?
>>>>>>
>>>>>> Thanks for your time.
>>>>>>
>>>>>> Tim
>>>>>> KX4ZU
>>>>>> _______________________________________________
>>>>>>
>>>>>> ARM-allstar mailing list
>>>>>> ARM-allstar at hamvoip.org
>>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>>>>
>>>>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>>
>>>>> ARM-allstar mailing list
>>>>> ARM-allstar at hamvoip.org
>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>>>
>>>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>>>>
>>>>
>>>> _______________________________________________
>>>>
>>>> ARM-allstar mailing list
>>>> ARM-allstar at hamvoip.org
>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>>
>>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>> _______________________________________________
>>>
>>> ARM-allstar mailing list
>>> ARM-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>
>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>
>
------------------------------
Message: 5
Date: Fri, 21 Jan 2022 00:34:57 -0500 (EST)
From: David McGough <kb4fxc at inttek.net>
To: "\"Irvin Fontanes via ARM-allstar\"" <arm-allstar at hamvoip.org>
Cc: Irvin Fontanes <irvinpr at gmail.com>
Subject: Re: [arm-allstar] Hamvoip Motorola programming with dosbox
Message-ID:
<Pine.LNX.4.44.2201210027061.32491-100000 at goliath.inttek.net>
Content-Type: TEXT/PLAIN; charset=ISO-8859-1
Hi,
Yes, dosbox still works. These instructions should get it going for you:
https://hamvoip.org/hamradio/motorola_programming/
What ssh client application are you using to access the RPi3 ??
73, David KB4FXC
On Wed, 19 Jan 2022, "Irvin Fontanes via ARM-allstar" wrote:
> Hello.
I followed the directions on the pdf file and I cannot get the dosbox window
to pop up on the remote computer???.
Can someone confirm the pdf instructions still work?
I???ve gone as far as using a new, latest image, hamvoip installation.
I???m able to ssh to the rpi3 and perform functions as usual.
_______________________________________________
ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
------------------------------
Message: 6
Date: Fri, 21 Jan 2022 16:45:05 +0000 (UTC)
From: "am_fm_radio at yahoo.com" <am_fm_radio at yahoo.com>
To: "arm-allstar at hamvoip.org" <arm-allstar at hamvoip.org>
Subject: [arm-allstar] Fresh upgrade issue.
Message-ID: <1881646425.1073403.1642783505614 at mail.yahoo.com>
Content-Type: text/plain; charset=UTF-8
During the bitter cold last 4-5 days. I decided to upgrade and start fresh.I
have a RPI3B+ and a SHARI UHF.It has been working flawlessly for 2-3 years,
and I had heard the new Archlinux-Asterisk buildimproved ECHOLINK and so on.
I also decided to remove the Black 8GB micro SD card of unknown origin and
replace it with a SANDISK 16GB Class 10 that I had on hand.
So I did a total renew as if the RPI-SHARI was brand new..
Subsequently I had 2 problems First I resolved.? The problem post renew, was
3.6.A,B touch tones would not decode on my Anytone Term-*R and a Radioditty
GD77... Yet all was fine with my Yaesu FT70D.
I resolved it by following Patrick Perdue's Shari audio set up that is found
on Blind Hams.com The second problem is baffling me... When in the shack, I
monitor Blind Hams Talk group #506315 as our club W?VFW repeater I take care
of also monitors it. We have 4 blind hams in the membership.
I am finding I connect using the *73<NODE>? then leave the ham shack -work,
food-sleep and come back later The ALLSTAR NODE is "REPEAT ONLY"This has
been going on for a few days. I decided to SSH into the RPI and issue the
command "uptime" to find that my RPI was rebooted any where between a hour
ago to 6 hours.. Time away can be 8-10 hours, SO I don't know how many time
it rebooted during my absences.?
This is new since the "REBUILD". Same power pack as before.? My "Official"?
wall wart and my entire ham station is on a IBM 1000VA UPS- None of my 4
other computers in the ham shack are affected.
Ir's almost like something is telling it to reboot. BTW I have a new in the
box RPI3B+ I opened the box and tried it. Same problem.. That's why I've
been fighting this for 4-5 days now..
Am I missing something? or need to configure something?
Alert- It just rebooted.. time between reboots -- about 2 hours.. 8:38 to
10:30....
If no response, I just received 3 new SANDISK ULTRA MicroSDHC cards in the
mail .. Next would be burn one. I do have my current SD card saved.. That
SANDISK came out of a phone where I removed it for a larger one. I did do a
hard slow format on it before loading new HAMVOIP...
Larry W8LM
------------------------------
Subject: Digest Footer
_______________________________________________
ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
------------------------------
End of ARM-allstar Digest, Vol 92, Issue 20
*******************************************
More information about the ARM-allstar
mailing list