[arm-allstar] Status Tab in DVSwitch Mobile App not working after v1.7 upgrade

[David McGough]

Hi Larry,


Typically, a message like "Node information not found" indicates that the 
astdb data is out of date and needs to be refreshed.  I'm not sure how 
this is handled in the DVSwitch Mobile app??  This is probably a question 
for the DVSwitch groups.io list; I don't know the answer.

73, David KB4FXC


On Thu, 20 Jan 2022, "Larry Mollica via ARM-allstar" wrote:

> DVSwitch Mobile now getting status populated. 
> 
> However, connecting to a couple of hubs; for every node number that starts with 5 (5xxx, 5xxxx), the Node Information field says “Node information not found”.
> Nodes not staring with 5, the field looks normal.
> 
> Screenshot attached.
> 
> 
> 
> 
> Larry
> AD6G
> 
> 
> On Jan 19, 2022, at 12:24 PM, Tim Jones via ARM-allstar arm-allstar-at-hamvoip.org wrote:
> 
> > I just updated my node and rpt.conf.  The Status tab is working again.
> > 
> > Thanks!
> > Tim
> > KX4ZU
> > 
> >> On 01/19/2022 3:00 PM David McGough via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> >> 
> >> 
> >> Hi Everyone,
> >> 
> >> I just updated the hamvoip-asterisk package. The update allows linkslist
> >> data to be pushed to phonemode devices, such as is seen in the Status Tab
> >> on the DVSwitch Mobile App.  The feature is disabled, by default.  To
> >> re-enable, a minor update is needed in the rpt.conf node stanza.  For
> >> example:
> >> 
> >> ;rpt.conf
> >> [1234]
> >> phonesendlinks=1
> >> 
> >> 
> >> 
> >> ....After making this change, perform and "rpt reload" or restart 
> >> asterisk.
> >> 
> >> 
> >> 73, David KB4FXC
> >> 
> >> 
> >> 
> >> 
> >> On Fri, 31 Dec 2021, "David McGough via ARM-allstar" wrote:
> >> 
> >>> 
> >>> Hi Tim,
> >>> 
> >>> I'll take a look at the DVSwitch Mobile app and try to duplicate this 
> >>> problem.
> >>> 
> >>> 73, David KB4FXC
> >>> 
> >>> 
> >>> On Fri, 31 Dec 2021, "Tim Jones via ARM-allstar" wrote:
> >>> 
> >>>> Before the HamVOIP 1.7 upgrade, the Status tab on the DVSwitch Mobile app would show all the connected nodes on the node which I was connected.  After the upgrade, the Status tab doesn't show anything.   I confirmed this by upgrading two separate nodes. 
> >>>> 
> >>>> The Status tab still works when I connect to an ASL node I have setup.   This is a minor issue.  Everything else with the DVSwitch Mobile app appears to work the same as pre-upgrade.   However, it would be nice to get the Status information to show up again.
> >>>> 
> >>>> Any suggestions on how to get the Status tab working again?
> >>>> 
> >>>> Thanks for your time.
> >>>> 
> >>>> Tim
> >>>> KX4ZU
> >>>> _______________________________________________
> >>>> 
> >>>> ARM-allstar mailing list
> >>>> ARM-allstar at hamvoip.org
> >>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>>> 
> >>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >>>> 
> >>> 
> >>> _______________________________________________
> >>> 
> >>> ARM-allstar mailing list
> >>> ARM-allstar at hamvoip.org
> >>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>> 
> >>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >>> 
> >> 
> >> _______________________________________________
> >> 
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >> 
> >> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > _______________________________________________
> > 
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > 
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>