[arm-allstar] 2 nodes on same network

[Dave Petrie]

did you port forward, NAT from your router to the iax ports on the two
nodes, so that incoming will work.
If you don't want that to happen then put the node info in rpt.conf down at
the bottom for both nodes
the local one 127.0.0.1 that you are editing and the other one whatever lan
IP you assigned it.

On Mon, Feb 21, 2022 at 6:51 PM "Matt Holder via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hello all,
> I am setting up a second node here on a separate pi and running into some
> issues. I am not able to get the two nodes to connect to each other. I am
> however able to get them both to connect out to any other node. So I am
> assuming it is an issue with them being on the same network?
> I changed all the ports on the second pi, its reporting to Allstar and I
> can control it with Supermon just can my my two nodes to actually connect
> to each other.
> Any suggestions?
> Thanks,Matt - ke0ncp
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>