[arm-allstar] connections dropping

[Teton Amateur Radio Repeater Association]

I am wondering which router you are using?

Mick - W7CAT

----- Original Message -----
From: "\"Don Sayler via ARM-allstar\""
To: Don Sayler via ARM-allstar
Sent: Sunday, February 13, 2022 04:46:58 PM
Subject: Re: [arm-allstar] connections dropping

 > After a lot of effort and correspondence with gl/inet, it turns out that
 > the problem is due to a bug in the router firmware! I had to go back 
a few
 > revs of firmware, and now it's working.
 >
 > I'm still evaluating if there are any security concerns.
 >
 >
 >
 > On Thu, Feb 10, 2022 at 12:41 PM Don Sayler wrote:
 >
 > > I am really at a loss here. I have installed the latest HamVOIP 
image, but
 > > our problem continues.
 > >
 > > Most Echolink connections into our node drop after 2-3 minutes, 
with an
 > > 'rtcp timeout'. IaxRpt clients drop too, although this isn't a big 
deal for
 > > us right now. Allstar clients do not, and some Echolink connections 
do not.
 > >
 > > From what I understand, the rtcp timeout is like a heartbeat 
signal, after
 > > so many are missed, the connection is dropped by the server. I could
 > > increase the setting, but that might be addressing the sysmptom and 
not the
 > > problem. I'm confused as to why some drop and some don't. This 
happens on
 > > both the Windows Echolink app and the phone app. I'm using the 
Android one,
 > > but it happens to those with the iOS version too. It doesn't seem 
to matter
 > > which Network Connection is selected in the phone app.
 > >
 > > Thanks for any suggestions.
 > >
 > > Here is the echolink.conf file.
 > > [el0]
 > > confmode=no
 > > call=K7LWH-R
 > > pwd=just a password
 > > name=Lake Washington Ham Club
 > > qth=Kirkland WA USA
 > > email=lwhc at lakewashingtonhamclub.org
 > > maxstns=20
 > > rtcptimeout=10
 > > node=4441
 > > recfile=/tmp/recorded.gsm
 > > astnode=51860
 > > context=radio-secure
 > > server1=server1.echolink.org
 > > server2=server2.echolink.org
 > > server3=server3.echolink.org
 > > ;naeast.echolink.org
 > > ;nasouth.echolink.org
 > > servers.echolink.org
 > > ;backup.echolink.org
 > > ; Change following setting to your parameters
 > > freq=145.49
 > > tone=103.4
 > > lat=47.663751
 > > lon=-122.166478
 > > power=100
 > > height=500
 > > gain=4
 > > dir=0
 > > ;
 > > ; Message about your Echolink node. Up to 256 characters All in
 > > ; one line. Use \n for newline. Uncomment to use.
 > > ;
 > > message=Welcome to the Lake Washington Ham Club repeater system!
 > > ;
 > > ; Deny-permit - Only use one, either whitelist using permit or
 > > ; blacklist using deny Echolink stations. Wildcards can be used
 > > ; Example - permit WA3DSP*,W3XYZ* would allow these calls
 > > ; by themseleves or with -L or -R suffix. Uncomment to use.
 > > ;
 > > ;deny=
 > > ;permit=
 > >
 > _______________________________________________
 >
 > ARM-allstar mailing list
 > ARM-allstar at hamvoip.org
 > http://uxpxj.smtpclick.com/tracking/qaR9ZGLjAQZkZQx0ZQD0AGRmZQp1ZvM5qzS4qaR9ZQbjIN
 >
 > Visit the BBB and RPi2/3/4 web page - http://uxpxj.smtpclick.com/tracking/qaR9ZGLjAQZkZQx0ZQD0AGRmZQp1ZvM5qzS4qaR9ZQbkHj
 >
-- 
Untitled Document