[arm-allstar] Dual Repeater Setup

[Dave Petrie]

Just for my records, for future referral if two registered allstar nodes
are on the same raspberry Pi
two places need to be edited. Thank You David KB4FXC for all you do.
In the /etc/asterisk  rpt.conf file at the bottom.

[nodes]
543920 = radio at 127.0.0.1/543920,NONE ;change the node number to yours
543921 = radio at 127.0.0.1/543921,NONE ;change the node number to yours

Then in the /etc/asterisk  iax.conf file.

; Uncomment one or both of the following lines and add
; your node number in place of xxxxx
; and your node password in place of yyyyyy

register => 543920:passwordhere at register.allstarlink.org ;change the node
and password
register => 543921:passwordhere at register.allstarlink.org ;change the node
and password
;register => xxxxx:yyyyyy at register.allstarlink.org

On Wed, Feb 2, 2022 at 11:56 PM "David McGough via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

>
> Hi,
>
> Your system should work fine with 6-digit nodes.  Just make sure to update
> your /etc/asterisk/rpt.conf file, nodes stanza properly. For example, if
> you're using IAX port 4569:
>
> ;rpt.conf
> [nodes]
> 543920 = radio at 127.0.0.1/543920,NONE
> 543921 = radio at 127.0.0.1/543921,NONE
>
>
> Also, I noticed that neither of these nodes were registering tonight, for
> public access. If public access is desired, make sure you've got
> registration statements for 543920 and 543921 in the
> /etc/asterisk/iax.conf file.
>
>
> 73, David KB4FXC
>
>
>
> On Thu, 3 Feb 2022, "James Pahoundis via ARM-allstar" wrote:
>
> >  We are running 2 nodes off of 1 pi. and we can not connect the two
> nodes together anymore. it has always been a problem because our node
> numbers are 6 digits # 543920 and 543921. So when we try to connect it
> will try to connect to via echolink!! Does anyone know how to get it to
> connect to allstar nodes with 6 digit numbers?
> > James kc6ucn
> >
> >     On Wednesday, February 2, 2022, 08:40:40 PM CST, Dave Petrie via
> ARM-allstar <arm-allstar at hamvoip.org> wrote:
> >
> >  I am managing some repeaters remotely. A couple of the raspberry Pi 3B
> Plus
> > have two repeaters.
> > email me directly or connect to my node 40039 and I will try and help
> > Dave 40039
> >
> > On Wed, Feb 2, 2022 at 9:20 PM "Jeff Dale via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Looking for anyone who's currently running 2 repeaters off one Pi.
> > >
> > > I have a few questions and looking for tips.
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>