[arm-allstar] dtmf audio level

[Rich, WA2ZPX]

Don,

Most Controllers mute DTMF tones unless it is set  up not to..  Are you sure
this is not the case?  Just throwing that out there..

Rich

-----Original Message-----
From: ARM-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of "Don
Sayler via ARM-allstar"
Sent: Monday, August 15, 2022 3:44 PM
To: Don Sayler via ARM-allstar
Cc: Don Sayler
Subject: Re: [arm-allstar] dtmf audio level

Oh, and we are using an external multi-port repeater controller to connect
the node to our repeaters. I can adjust the audio in & out on that, but it
doesn't distinguish between dtmf & voice. It's all just audio.

On Mon, Aug 15, 2022 at 12:24 PM Don Sayler <don.sayler at gmail.com> wrote:

> Our node isn't recognizing dtmf tones. After doing a bit of experimenting,
> I have figured out that the audio level is too high and distorting the
> tones. But the voice audio level is fine. Is there a way to adjust the
> level of the dtmf tones individually? I didn't see one, and I'm not even
> sure how that would work. But I figured I'd ask the question...
>
> Thanks.
> Don
>
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org