[arm-allstar] Can HamVoIP run on the official IRLP pirlp4 node hardware?

[David McGough]

David,

What version of the Raspberry Pi hardware do you have?  HamVoIP supports 
versions:

Zero2W, 2B, 3B, 3B+, 3A+, CM3, CM4, Pi400 and 4B (rev 1.0 thru 1.5).

The IRLP hardware isn't supported, you would need a standard AllStar-style 
fob, which are easy to obtain.  Some sources are listed here:

https://hamvoip.org/#commercial



73, David K4FXC




On Tue, 9 Aug 2022, "David Ranch via ARM-allstar" wrote:

> 
> Hello Everyone,
> 
> I have one of these pIRLP4 - a complete IRLP node setups ( 
> https://www.irlp.net/PiRLP4.html) but the SD card died on it.  Instead 
> of rebuilding it as an IRLP node, I'm curious if the same hardware is 
> supported to make it into a HamVoIP / Allstar node?  The hardware is at 
> the repeater site so I cannot interrogate the details of the IRLP board 
> right now but maybe someone has some experience here?
> 
> --David
> KI6ZHD
> 
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>