[arm-allstar] text messages
Dave Petrie
wa2kjc at gmail.com
Sun Aug 7 14:13:11 EDT 2022
no one has told me how to do what I want, I know all about
the what if's and so on, what you desire isn't necessarily
what everyone wants, I want a global playback ascending tone
just before *99 takes effect.
You do what you want and don't try to convince me to do it.
I will keep asking around and maybe after a year or two someone
will have the solution.
Thanks everyone
Dave
On Sun, Aug 7, 2022 at 2:01 PM "David McGough via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:
>
> You can also get PTT handsets for many SIP phones, which when combined
> with VOX should work effectively. Here are some Cisco examples from ebay:
>
> https://www.ebay.com/itm/234542686180
>
> https://www.ebay.com/itm/265681446062
>
>
> 73, David K4FXC
>
>
> On Sun, 7 Aug 2022, "Patrick Perdue via ARM-allstar" wrote:
>
> > Yep. And if you have SIP/IAX attached directly to a repeater, that tone
> > would go out over the air as well, which is probably not desirable.
> > Plus, you'd have to set holdofftelem=0, and remember that there is an
> > inherent delay between the time the localplay command is sent, and the
> > time the file actually plays. This could add about 1.5 seconds between
> > the time the macro is called, and the time the tone plays. Factor in
> > some more latency, and you could end up with a situation where you have
> > a few seconds of dead air before you realize you're even transmitting if
> > you rely on the tone.
> >
> > I do sometimes use a SIP softphone to run nets, because it sounds better
> > and is less latent than iaxrpt, and for that, I do use DTMF entry rather
> > than VOX. I've never encountered a situation where I've typed *99 and it
> > didn't work.
> >
> > I use a private node with dahddi/pseudo for the phone such that I can
> > disable all telemetry. With the PJSIP library, which is used in both
> > software and hardware, weird stuff can happen even if phonelinks=0.
> >
> >
> > On 8/7/2022 12:00 PM, "David McGough via ARM-allstar" wrote:
> > > I use VOX mode with all my SIP/SCCP/autopatch phones. Then, to make
> sure
> > > VOX doesn't trip, I use the mic-mute button on the phone.
> > >
> > > I don't know of any easy way to play a tone on key-up, other than
> perhaps
> > > turning *99 into a macro that includes a localplay operation. Further,
> > > while this might be useful for first-time users, I expect it would
> quickly
> > > get really old in the long term....
> > >
> > > Some users on my systems regularly use reverse-autopatch functionality
> to
> > > call nets, etc., when out of the repeater coverage areas. The
> > > VOX/mute-button method works well, in practice.
> > >
> > > 73, David K4FXC
> > >
> > >
> > >
> > > On Sun, 7 Aug 2022, Dave Petrie wrote:
> > >
> > >> Good Morning David, that was an easy fix, Thank You!
> > >> Any luck on pointing me to *99 keyup so I can add an ascending tone
> right
> > >> after
> > >> I keyup letting me know I am transmitting audio from my sip deskphone?
> > >> I like the *0# to unkey and been trying to find where the cop
> commands are
> > >> so I can play, but no luck yet.
> > >>
> > >>
> > >> On Sun, Aug 7, 2022 at 9:56 AM David McGough <kb4fxc at inttek.net>
> wrote:
> > >>
> > >>> In your rpt.conf 40039 node stanza, set:
> > >>>
> > >>> phonesendlinks=0
> > >>>
> > >>> ....Save and reload.
> > >>>
> > >>> 73, David K4FXC
> > >>>
> > >>>
> > >>> On Sun, 7 Aug 2022, "Dave Petrie via ARM-allstar" wrote:
> > >>>
> > >>>> i have my sip phone connected to freepbx and
> > >>>> freepbx trunk to my allstar hamvoip node 40039 via iax
> > >>>> and outbound calling using that trunk with specified
> > >>>> node 40039 as a number, i keep getting L T5000 text messages
> > >>>> on my sip phone which is telling me that my node
> > >>>> 40039 that I am listening to via the trunk has a linked
> > >>>> node 5000. How do i stop those text messages from
> > >>>> coming in to my sip deskphone?
> > >>>> _______________________________________________
> > >>>>
> > >>>> ARM-allstar mailing list
> > >>>> ARM-allstar at hamvoip.org
> > >>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >>>>
> > >>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >>>>
> > >>>
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
More information about the ARM-allstar
mailing list