[arm-allstar] text messages

[David McGough]

I use VOX mode with all my SIP/SCCP/autopatch phones.  Then, to make sure
VOX doesn't trip, I use the mic-mute button on the phone.

I don't know of any easy way to play a tone on key-up, other than perhaps
turning *99 into a macro that includes a localplay operation.  Further,
while this might be useful for first-time users, I expect it would quickly
get really old in the long term....

Some users on my systems regularly use reverse-autopatch functionality to
call nets, etc., when out of the repeater coverage areas.  The
VOX/mute-button method works well, in practice.

73, David K4FXC



On Sun, 7 Aug 2022, Dave Petrie wrote:

> Good Morning David, that was an easy fix, Thank You!
> Any luck on pointing me to *99 keyup so I can add an ascending tone right
> after
> I keyup letting me know I am transmitting audio from my sip deskphone?
> I like the *0# to unkey and been trying to find where the cop commands are
> so I can play, but no luck yet.
> 
> 
> On Sun, Aug 7, 2022 at 9:56 AM David McGough <kb4fxc at inttek.net> wrote:
> 
> >
> > In your rpt.conf 40039 node stanza, set:
> >
> > phonesendlinks=0
> >
> > ....Save and reload.
> >
> > 73, David K4FXC
> >
> >
> > On Sun, 7 Aug 2022, "Dave Petrie via ARM-allstar" wrote:
> >
> > > i have my sip phone connected to freepbx and
> > > freepbx trunk to my allstar hamvoip node 40039 via iax
> > > and outbound calling using that trunk with specified
> > > node 40039 as a number, i keep getting L T5000 text messages
> > > on my sip phone which is telling me that my node
> > > 40039 that I am listening to via the trunk has a linked
> > > node 5000. How do i stop those text messages from
> > > coming in to my sip deskphone?
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >
> >
> >
>