[arm-allstar] ham voip on a Kenwood TKR850 repeater, hoping someone can help

[csmart8 at cogeco.ca]

No problem David. I had a good laugh, as I expect, did Jed. 😊


-----Original Message-----
From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "David McGough via ARM-allstar"
Sent: April 2, 2022 5:27 PM
To: "Chris via ARM-allstar" <arm-allstar at hamvoip.org>
Cc: David McGough <kb4fxc at inttek.net>
Subject: Re: [arm-allstar] ham voip on a Kenwood TKR850 repeater, hoping someone can help


Hi Chris,

Yes, point taken.  The "executive overview" of the photos is that it's basically plug-and-play to get the TKR repeaters working with HamVoIP.  
This is very easy to do.

73, David KB4FXC


On Sat, 2 Apr 2022, "Chris via ARM-allstar" wrote:

> Jed is blind, as are quite a few people on this mailing list I reckon, 
> so words please, not pictures. OK? 😉🤣


-----Original Message-----
From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "David McGough via ARM-allstar"
Sent: April 2, 2022 5:12 PM
To: "Jed Barton via ARM-allstar" <arm-allstar at hamvoip.org>
Cc: David McGough <kb4fxc at inttek.net>
Subject: Re: [arm-allstar] ham voip on a Kenwood TKR850 repeater, hoping someone can help


Jed,

Yes, HamVoIP works very well when used directly as the repeater controller.  I have this setup with all my repeaters.  For example, here is are old photo from the Beaglebone Black era, interfaced to a Kenwood TKR repeater.  These days, just use an RPi in place of the BBB.  These are photos of my "bench test" TKR-850 from 2014 (wow how time flies!):

https://hamvoip.org/kenwood-TKR/P1030830.JPG
https://hamvoip.org/kenwood-TKR/P1030831.JPG

Are you wanting a "assembly required" USB fob or already build and packaged?

Originally I used DMK URI hardware.  Now, I'm using Master's Communications RL-20 boards for new installations.

I'll take some photos of the latest "evolution," where I'm using RPiZ2W boards, which also work great.

73, David KB4FXC



On Sat, 2 Apr 2022, "Jed Barton via ARM-allstar" wrote:

> Hey Jim,  We were gonna hook the allstar node directly to the kenwood.
Anyone on here done that?

Cheers,

Jed


_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org

_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org

_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org