[arm-allstar] Connect and Disconnect - Tones only without voice announcement

[Dave Petrie]

Hi Travis, I am not sure what you mean by tones, courteous unkey tones ? I
use cw k when someone on my node unkeys and cw L when someone on a
connected link unkeys. I use dtmf to turn telemetry on and off. During nets
that I listen to the telemetry gets in the way.
in /etc/asterisk  rpt.conf  i assigned 984 and 986 to cop commands, but you
can use whatever is available to you.

[functions<your node>]

984=cop,33 ;telemetry enable ;turn on voice announcements
986=cop,34;telemetry disable ;tunr off voice announcements

So I send *984 to turn on voice and *986 to turn it off.

Hope that helps.
Dave

On Tue, Oct 26, 2021 at 7:10 PM "Travis French via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Good Morning,
>
> I am sure I am staring right at it but for the life of me, I am not
> finding the option to reduce the connect and disconnect announcements to
> tones only. I believe I have seen this before but can't seem to remember
> where this option resides. I would prefer not to disable external telemetry
> all together let alone reduce it to 1 minute. I am just looking to drop the
> voice portion of the connect and disconnect messages and only hear the
> tones.
>
> This is an option, correct?
>
> Thank you in advance,
>
> Travis - K2PCB
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>