[arm-allstar] Mototola Sound

[James R. Pilgram]

Here's the link. Sorry I didn't post it before. I was away from my 
computer. The wires aren't installed when you get the connector.

Jim NH6HI

On 10/23/21 4:43 PM, "Michael Webb via ARM-allstar" wrote:
> Does the cable actually use those pins?  If not, open up the radio and
> jumper it from the inside is an option.
>
> On Sat, Oct 23, 2021, 9:35 PM "Lewis Horn via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> Since the Mororola GM300s need a jumper on 2 of the 16 pins on the back to
>> enable the internal speaker, and the zrm cable uses the 16 pin ports, is
>> there another way to enable the internal speaker on the receive radio?
>>
>>
>>
>> Thanks,
>>
>>
>>
>> Lewis
>>
>> KD6YTS
>>
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org