[arm-allstar] No TX on additional USB node

[David McGough]

Hi Michael,

I noticed that your simpleusb_tune_usb1.conf file (below) has a [usb] 
stanza and the simpleusb_tune_usb.conf file has a [usb1] stanza??  Is this 
a typo??  Also, what is the contents of your simpleusb.conf file?


73, David KB4FXC


On Tue, 15 Jun 2021, "Michael Champion via ARM-allstar" wrote:

> I have added an additional CM108 and it works fine in the 
> simpleusb-tune-menu for tx and rx but when used as a node it only passes 
> rx audio.  PTT works but no TX audio goes out the port.
> 
> Rpt.conf for that port:
> 
> [1701]
> rxchannel=SimpleUSB/usb1
> duplex=0
> morse=morse529291
> wait_times=wait-times529291
> context =  radio
> idrecording=|iDE N5ZR/L
> tx_timeout=240000
> idtime=600000
> politeid=30000
> rx_timeout=300000
> rx_cosflap=20
> parrot=0
> beaconing=0
> ;
> 
> 
> simpleusb_tune_usb1.conf
> [usb]
> ; name=usb
> ; devicenum=0
> devstr=1-1.4:1.0
> rxmixerset=450
> txmixaset=500
> txmixbset=500
> txdsplvl=999
> 
> simpleusb_tune_usb.conf
> [usb1]
> ; name=usb1
> ; devicenum=1
> devstr=1-1.3:1.0
> rxmixerset=500
> txmixaset=400
> txmixbset=100
> txdsplvl=250
> 
> # lsusb
> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 001 Device 004: ID 0d8c:0012 C-Media Electronics, Inc.    <- Second unit
> Bus 001 Device 003: ID 0d8c:0012 C-Media Electronics, Inc.    <- First unit
> Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> 
> 
> 
> -Michael
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>