[arm-allstar] audio levels

[David McGough]

Hi Don,

The place to start with the audio levels is getting them set right for the 
AllStar side first. Then, the echolink levels should already be correct 
(or very close).

What type of an AllStar node do you have and how are you using it?

73, David KB4FXC


On Fri, 23 Jul 2021, "Don Sayler via ARM-allstar" wrote:

> Hi Folks.
> 
> I' trying to get our Allstar node dialed in, starting with Echolink. The
> handshake works, COR and PTT work properly.
> 
> I'm having a hard time getting the audio levels set, I had to set TX DSP
> very low to avoid getting a bunch of noise coming into our repeater from
> the Echolink app on my phone. Audio going to the phone is low level, but
> clear.
> 
> >From what I've read on here, maybe the audio level from our repeater is too
> high. Is there a recommended peak-to-peak voltage to set our repeater audio
> output to?
> 
> Thanks.
> Don Sayler, W7OXR
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>