[arm-allstar] New repeater linking issue

[Bryan St Clair]

What was the results of the DNS queries?

All correct?

On Tue, Jan 19, 2021, 09:46 Tom Whiteside <tomw at ecpi.com> wrote:

> I can see it trying on the node attempting the connection with congestion
> complaints.   Seeing nothing on the side I am trying to connect to.
>
> Tom
>
> -----Original Message-----
> From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Bryan St
> Clair via ARM-allstar"
> Sent: Tuesday, January 19, 2021 11:02 AM
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: Bryan St Clair <bryan at k6cbr.us>
> Subject: Re: [arm-allstar] New repeater linking issue
>
> I would suggest you watch the CLI on one of the inbound nodes and then try
> your connection in question.
>
> If you see it attempt in the CLI, you will know what's stopping it on the
> node.
>
> If not seen in the CLI, you know you have a firewall issue (I would think).
>
> Did you confirm all 3 are seeing the correct IP address in DNS for each
> other? You only using ASL registrations?
>
> Bryan
>
>
> On Tue, Jan 19, 2021, 07:51 "David McGough via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> >
> >
> > Date: Tue, 19 Jan 2021 09:37:15 -0600
> > From: Tom Whiteside <tomw at ecpi.com>
> > To: 'ARM Allstar' <arm-allstar at hamvoip.org>
> > Subject: New repeater linking issue
> >
> >
> > I've been running three repeaters here for years using the arm-allstar
> > code and all have been working fine until a recent network upgrade
> > necessitated by a failed router. This router is not maintained by me.
> >
> > Here is the situation:
> >
> > Two of the repeaters can share the same local address space and I have
> > linking information called out in the bottom of the rpt.conf files -
> > those two repeaters are linking just fine. They have static IP
> > addresses that can be pinged from here outside the network. Putty works
> fine to them.
> >
> > The third is outside the local network and attempting to connect to
> > one of the external nodes is not working.
> >
> > All three repeaters are showing up in green on the Allstar node list.
> >
> > Nothing shows linked on the bubble charts.
> >
> > I figured it was a port issue but, to my surprise, Zoiper connections
> > work. Echolink works.
> >
> > Again, all was working before the network change. Any coaching on what
> > to do? BTW nodes 43115 and 43117 are the ones behind this network.
> >
> > Tom N5TW
> >
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
>