[arm-allstar] 1 Node, 2 radios, not at the same time!

[bill kittilson]

Why not run both   at the same time.  Just make sure the radios are far enough apart and frequency they don’t interfere with each other.  Just simply edit the configuration file and replace the second load number with a real note number. 

Bill Kittilson
N3JHS


> On Jan 14, 2021, at 6:20 PM, Rob Harrison via ARM-allstar <arm-allstar at hamvoip.org> wrote:
> 
> Hi All,
> 
> 
> 
> I have a node running using a RPi3, CM108 and Baofeng888 all working fine.
> 
> 
> 
> What I would like to-do is fit a second CM108 into the RPi which would interface to a second radio.
> 
> 
> 
> I would then like to if possible by simply editing a config file to tell the node to use 1 or the other radio/cm108 combinations. (rather than swapping CM108’s which I guess would work)
> 
> 
> 
> Is this possible or am I in the realms of fantasy here?
> 
> 
> 
> 73 de Rob G4UJS
> 
> 
> 
> 
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org