[arm-allstar] Disconnects after 45 seconds

[wb9rsq at gmail.com]

This sounds like my problem from last spring.
I suggest it is the double NAT problem we tracked down related to AT&T with router behind router.
David, you may recall we found that VPN bypassed the issue.
I had DMZed the main router that was behind my AT&T modem.
In the end I had to revert to setting up firewall rules to all the ports I cared about on my main router from the modem instead of DMZ.
That cleared up the double NAT issue.

 
-----Original Message-----


From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "David McGough via ARM-allstar"
Sent: Friday, January 1, 2021 9:27 AM
To: Daren Loxley 2E0LXY <2e0lxy at amateurradio.uk>
Cc: David McGough <kb4fxc at inttek.net>; Daren Loxley via ARM-allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] Disconnects after 45 seconds


Hi Daren,

Okay.  How is your /etc/asterisk/extensions.conf incoming stanza for the 
connections from IAXRpt set?? For example, if your node number was 
12345, something like:

; extensions.conf
[radio-iaxrpt]
exten => 12345,1,Set(CALLERID(num)=0)
exten => 12345,n,SayDigits(12345)
exten => 12345,n,Rpt(12345|P|${CALLERID(name)})


Happy New Year!

73, David KB4FXC

On Fri, 1 Jan 2021, Daren Loxley 2E0LXY wrote:

> Hi David.
> 
> Full restart of the server but unfortunately still the same.
> 
> Daren
> 
> ⁣Get BlueMail for Android ​
> 
> On 1 Jan 2021, 14:23, at 14:23, David McGough <kb4fxc at inttek.net> wrote:
> >
> >Make sure to restart your node softare after updating the settings on
> >the portal.
> >
> >
> >On Fri, 1 Jan 2021, Daren Loxley 2E0LXY wrote:
> >
> >> Hi David.
> >> Thanks for the suggestion.
> >> Did as you suggest but unfortunately still the same, 45 seconds and
> >dropped.
> >>
> >> Happy new year!
> >> Daren
> >>
> >>
> >> On 31 Dec 2020, 23:09, at 23:09, David McGough <kb4fxc at inttek.net>
> >wrote:
> >> >
> >> >Daren,
> >> >
> >> >You need to go to the AllStarLink.org portal and into the
> >> >Portal-->Node Settings  page. Select node 53047 and then set
> >> >"Is node a remote base station?" to NO  and set "If remote base, is
> >it
> >> >frequency agile?" to NO....Then save the settings. The update may
> >take
> >> >several minutes to propagate to the whole network.
> >> >
> >> >This should fix the issue.
> >> >
> >> >Happy New Year!
> >> >
> >> >73, David KB4FXC
> >> >
> >> >
> >> >
> >> >On Thu, 31 Dec 2020, "Daren Loxley via ARM-allstar" wrote:
> >> >
> >> >> Hi Guys.
> >> >Help!
> >> >I have a Hamvoip setup with Echolink.
> >> >all connects and disconnects as it should if I use Supermon.
> >> >If I try to use iaxRpt is connects then disconnects after about 45
> >> >seconds.
> >> >Before that I can use the node as expected, connect, disconnect
> >Allstar
> >> >
> >> >nodes and Echolink nodes with audio but always disconnects after 45
> >> >seconds. 😕
> >> >astlog says.
> >> >ERROR[3660] app_rpt.c: No link messages from [2E0LXY] in 46 seconds
> >--
> >> >One way audio??? Forcing reconnect.
> >> >TIA.
> >> >
> >> >Happy New Year!
> >> >
> >> >Daren, 2E0LXY
> >> >Node 53047
> >> >
> >> >_______________________________________________
> >> >
> >> >ARM-allstar mailing list
> >> >ARM-allstar at hamvoip.org
> >> >http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >> >
> >> >Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >>
> 

_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org