[arm-allstar] Disconnects after 45 seconds

[Daren Loxley 2E0LXY]

Hi David. 
Thanks for the suggestion. 
Did as you suggest but unfortunately still the same, 45 seconds and dropped. 

Happy new year! 
Daren


On 31 Dec 2020, 23:09, at 23:09, David McGough <kb4fxc at inttek.net> wrote:
>
>Daren,
>
>You need to go to the AllStarLink.org portal and into the
>Portal-->Node Settings  page. Select node 53047 and then set 
>"Is node a remote base station?" to NO  and set "If remote base, is it 
>frequency agile?" to NO....Then save the settings. The update may take 
>several minutes to propagate to the whole network.
>
>This should fix the issue.
>
>Happy New Year!
>
>73, David KB4FXC
>
>
>
>On Thu, 31 Dec 2020, "Daren Loxley via ARM-allstar" wrote:
>
>> Hi Guys.
>Help!
>I have a Hamvoip setup with Echolink.
>all connects and disconnects as it should if I use Supermon.
>If I try to use iaxRpt is connects then disconnects after about 45
>seconds.
>Before that I can use the node as expected, connect, disconnect Allstar
>
>nodes and Echolink nodes with audio but always disconnects after 45 
>seconds. 😕
>astlog says.
>ERROR[3660] app_rpt.c: No link messages from [2E0LXY] in 46 seconds -- 
>One way audio??? Forcing reconnect.
>TIA.
>
>Happy New Year!
>
>Daren, 2E0LXY
>Node 53047
>
>_______________________________________________
>
>ARM-allstar mailing list
>ARM-allstar at hamvoip.org
>http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>Visit the BBB and RPi2/3/4 web page - http://hamvoip.org