[arm-allstar] Kenwood repeater issue

[kg5rdf]

Its possible for the ID to leak through if someone keyed up. Just adjust in simple usb tune M and N so tail does not bark. 
-------- Original message --------From: Les Keegan via ARM-allstar <arm-allstar at hamvoip.org>Date: 2/7/21  11:51 AM  (GMT-06:00) To: arm-allstar at hamvoip.org Cc: Les Keegan <n4lpk at comcast.net> Subject: [arm-allstar] Kenwood repeater issue I have a remote node  on a Kenwood TKR-750 repeater. Recently I connected to a hub node and was told that the Kenwood repeater was causing interference from the squelch tail and the repeater ID. I have the repeater ID un toned so I am not sure why the id is causing interference and we have a very short squelch tail set at 0.4 seconds.Is  there something in the settings I can change to make this interference go away?Les KeeganN4LPK_______________________________________________ARM-allstar mailing listARM-allstar at hamvoip.orghttp://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstarVisit the BBB and RPi2/3/4 web page - http://hamvoip.org