[arm-allstar] Node to be used as a HUB

[Steve Agee]

*No, a hub has no USB sound card hardware interfaces. All processing 
takes place in the software. Be sure to set your hardware type to 
"dahdi/pseudo" in your rpt.conf file to let app_rpt know there is no 
hardware devices attached.

N5ZUA
*
On 2/5/2021 10:18 AM, "Keynon Lannom via ARM-allstar" wrote:
> I would like to setup a node to work as a HUB only - no radio/repeater
> attached directly to the node. Would a sound card still be needed in this
> case? If yes, any recommendations? I am assuming one would still be needed
> to mix the audio, etc.
>
> KB5GLC/Keynon
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org