[arm-allstar] MAJOR HamVoIP UPDATE 1.7.0-01 RELEASED

[Patrick Perdue]

I've been using alpha versions of HamVoIP with Hamlib to control a 
Kenwood TM-D700A as a remote base in North Carolina from New York, and a 
V71A at home in New York. Nothing to do with HamVoIP, per se, but I've 
found a lot of stuff doesn't work on the V71A using the D710G module 
(closest thing to the V71 that is supported by Hamlib). For example, I 
can change memories if the radio is already in NR mode, I can change 
from VFO A to VFO B, but once that's done, I can't get back to NR/memory 
mode. While in VFO, I can't query or change frequency.

I can reliably change output power level, squelch and some other parameters.

This all works on the older D700A, and probably would work with a real 
D710G as well.

Definitely looking forward to integrated remote base functionality.


On 12/25/2021 8:31 PM, "David Bufkin via ARM-allstar" wrote:
> Hi David,
> You mentioned the remote base upgrade is coming. Is the hamlib remote control still included?
> I spoke to you a while back about the m710. I have that and made a ci-v. I’ve been using it with some controlling software which is really nice. I can’t wait to get it as a remote base!
> I also made an interface for my Kenwood V7a which I am also going to make a remote base with as well. I look forward to gaining knowledge on how to do this.
> David
>
> Sent from my iPhone
>
>> On Dec 25, 2021, at 3:53 PM, Dave Petrie via ARM-allstar <arm-allstar at hamvoip.org> wrote:
>>
>> sorry i jumped the gun, you already had the insert done.
>> my dtmf tones work just like they did before the upgrade an hour ago
>>
>>
>>> On Sat, Dec 25, 2021 at 4:35 PM "Chris via ARM-allstar" <
>>> arm-allstar at hamvoip.org> wrote:
>>>
>>> Hmm, anyone else having trouble getting IAXRPT working with their node?
>>>
>>> I can connect IAXRPT, I can PTT, but DTMF goes nowhere... can't get my node
>>> to connect to anything.
>>>
>>> The node is working fine otherwise, i.e. with RF input from radios.
>>>
>>> Comments below the instructions:
>>>
>>> Modify the iax.conf file incoming stanza.
>>> For example:
>>>
>>> ; iax.conf
>>> [iaxphone]
>>> requirecalltoken=no
>>>
>>> I have two nodes and neither of the iax.conf files contain (iaxphone)
>>>
>>> What I do have is
>>> [iaxrpt)
>>> And under that, among other things, I already have a line that says
>>> requirecalltoken=no
>>>
>>> Then I have
>>> [myphone-iaxrpt]
>>> With a
>>> requirecalltoken=no
>>> line as well.
>>>
>>> I pasted the two lines from Dave's post underneath this section, and
>>> before
>>> ; [pbx]
>>>
>>> What can I try next?
>>>
>>> Chris
>>>
>>>
>>> _______________________________________________
>>>
>>> ARM-allstar mailing list
>>> ARM-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>
>>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>>>
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org