[arm-allstar] ARM-allstar Digest, Vol 91, Issue 4
Martin Boroff
martin.boroff at gmail.com
Mon Dec 6 13:09:10 EST 2021
Thank you to Patrick Purdue. Seems to have corrected my issue.
73, Marty Boroff WD9GYM
> On Dec 6, 2021, at 11:00 AM, arm-allstar-request at hamvoip.org wrote:
>
> Send ARM-allstar mailing list submissions to
> arm-allstar at hamvoip.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> or, via email, send a message with subject or body 'help' to
> arm-allstar-request at hamvoip.org
>
> You can reach the person managing the list at
> arm-allstar-owner at hamvoip.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of ARM-allstar digest..."
>
>
> Today's Topics:
>
> 1. Looking for help with IAXRPT Receive Turn Around (Martin Boroff)
> 2. Re: Looking for help with IAXRPT Receive Turn Around
> (Patrick Perdue)
> 3. VOIP desk phone DTMF ABCD (Dave Petrie)
> 4. VOIP DTMF (Dave Petrie)
> 5. VOIP DTMF (Dave Petrie)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 5 Dec 2021 11:16:38 -0600
> From: Martin Boroff <martin.boroff at gmail.com>
> To: arm-allstar at hamvoip.org
> Subject: [arm-allstar] Looking for help with IAXRPT Receive Turn
> Around
> Message-ID: <E1D8C932-0175-4FED-B555-637ED7F5126F at gmail.com>
> Content-Type: text/plain; charset=us-ascii
>
> I only use my IAXRPT client when I am away from home on extended periods. I am getting ready to leave on a vacation. While testing my IAXRPT client I notice that it does not return to receiving audio until the repeater drops carrier. I have a Hamvoip image on a Pi with RA70 sound board. The sound card is connected to a transceiver which is setup for my local repeater. When I inky with IAXRPT the radio immediately unkeys and I will hear the repeater id or if I am in QSO I hear the other person over the radio speaker but not the IAXRPT client until the repeater drops carrier.
>
> I have tried setting the IAXRPT client to simplex.
> I have tried changing the duplex setting in rpt.conf to 1. I prefer 0.
>
> Are there any other settings I should be adjusting.
>
> 73, Marty WD9GYM
>
> ------------------------------
>
> Message: 2
> Date: Sun, 5 Dec 2021 12:41:38 -0500
> From: Patrick Perdue <borrisinabox at gmail.com>
> To: Martin Boroff via ARM-allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Looking for help with IAXRPT Receive Turn
> Around
> Message-ID: <85a40219-5d8b-cdad-eeb3-4dd0d95debb0 at gmail.com>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
> If this is a half duplex RF link to a repeater, try enabling linktolink
> in rpt.conf under your node's stanza.
>
> linktolink=yes
>
> then either restart Asterisk, or do rpt reload, or just reload, from the
> Asterisk CLI.
>
> This will allow you to put your node radio into transmit mode while it
> is still receiving, I.E. no need to wait for the repeater to drop, as if
> you are using a local microphone on that radio, albeit with some latency.
>
> I do exactly this for a frequency agile remote base I set up in North
> Carolina, so I can use it from DVSwitch, IAXRPT or another analog
> repeater with ASL or HamVoIP connected in full duplex mode.
>
>
> On 12/5/2021 12:16 PM, "Martin Boroff via ARM-allstar" wrote:
>> I only use my IAXRPT client when I am away from home on extended periods. I am getting ready to leave on a vacation. While testing my IAXRPT client I notice that it does not return to receiving audio until the repeater drops carrier. I have a Hamvoip image on a Pi with RA70 sound board. The sound card is connected to a transceiver which is setup for my local repeater. When I inky with IAXRPT the radio immediately unkeys and I will hear the repeater id or if I am in QSO I hear the other person over the radio speaker but not the IAXRPT client until the repeater drops carrier.
>>
>> I have tried setting the IAXRPT client to simplex.
>> I have tried changing the duplex setting in rpt.conf to 1. I prefer 0.
>>
>> Are there any other settings I should be adjusting.
>>
>> 73, Marty WD9GYM
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
>
> ------------------------------
>
> Message: 3
> Date: Mon, 6 Dec 2021 07:38:31 -0500
> From: Dave Petrie <wa2kjc at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: [arm-allstar] VOIP desk phone DTMF ABCD
> Message-ID:
> <CAHwr_CUNqFH5KOnCNB5q=B=wcATXtxGjie3ph0B5xgewiWb74g at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Good Morning, I have a need to send a dtmf A, B, C, D from my voip desk
> phone to a private connected node. example, I want to run commands I made,
> *A12 .
> I can't find a way to make the phone do it so I was thinking maybe in
> extensions.conf under [myphone] there might be a way to convert a series
> of
> numbers to A or B or C or D as the case maybe.
> I have some numbers in mind, 951, 952, 953, 954
> here is my extensions.conf
> [myphone]
> exten => 5086,1,Answer
> exten => 5086,n,Playback,rpt/node
> exten => 5086,n,Playback,digits/5
> exten => 5086,n,Playback,digits/0
> exten => 5086,n,Playback,digits/8
> exten => 5086,n,Playback,digits/6
> exten => 5086,n,Set(CALLERID(num)=0)
> exten => 5086,n,Playback(rpt/connected)
> exten => 5086,n,Rpt,5086|P|${CALLERID(name)} ; *99 key # un key
>
>
> ------------------------------
>
> Message: 4
> Date: Mon, 6 Dec 2021 10:02:36 -0500
> From: Dave Petrie <wa2kjc at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: [arm-allstar] VOIP DTMF
> Message-ID:
> <CAHwr_CV93JXy7wY5EZ3aaiQ+pgCqF4dErnF05ZtafVEnfz1nMA at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> I just figured out how to do it in the rpt.conf cmd structure.
> But if someone comes up with another way I would like to hear about it.
> The idea is to be able to command ARN and ARRL playnews, and shut it
> down if need be, ltz is separate and will stop the broadcast as well.
> I thought a choice of 2 minutes after the hour to allow for hourly
> announcements, and 7am to 9pm was reasonable.
> So now I have choices, dtmf from RF access or use my voip deskphone.
>
> 95300=cmd,/./etc/asterisk/local/playnews/arnstop.sh
>
> 95100=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARN now 5086 G
> 95107=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARN 07:02 5086 G
> 95108=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARN 08:02 5086 G
> 95109=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARN 09:02 5086 G
> 95110=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARN 10:02 5086 G
> 95111=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARN 11:02 5086 G
> 95112=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARN 12:02 5086 G
> 95113=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARN 13:02 5086 G
> 95114=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARN 14:02 5086 G
> 95115=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARN 15:02 5086 G
> 95116=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARN 16:02 5086 G
> 95117=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARN 17:02 5086 G
> 95118=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARN 18:02 5086 G
> 95119=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARN 19:02 5086 G
> 95120=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARN 20:02 5086 G
> 95121=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARN 21:02 5086 G
>
> 95200=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARRL now 5086 G
> 95107=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARRL 07:02 5086 G
> 95108=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARRL 08:02 5086 G
> 95209=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARRL 09:02 5086 G
> 95210=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARRL 10:02 5086 G
> 95211=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARRL 11:02 5086 G
> 95212=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARRL 12:02 5086 G
> 95213=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARRL 13:02 5086 G
> 95214=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARRL 14:02 5086 G
> 95215=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARRL 15:02 5086 G
> 95216=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARRL 16:02 5086 G
> 95217=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARRL 17:02 5086 G
> 95218=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARRL 18:02 5086 G
> 95219=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARRL 19:02 5086 G
> 95220=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARRL 20:02 5086 G
> 95221=cmd,/./etc/asterisk/local/playnews/playnews-0.11 ARRL 21:02 5086 G
>
>
> ------------------------------
>
> Message: 5
> Date: Mon, 6 Dec 2021 11:09:20 -0500
> From: Dave Petrie <wa2kjc at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: [arm-allstar] VOIP DTMF
> Message-ID:
> <CAHwr_CUYZttdzunJwGyMLefF7Bpk_uEKejvL0W3J8aUqsAb5tg at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Just noticed in the ARRL section, the second and third line should be 952
> Just in case anyone is thinking of a copy and paste.
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>
> ------------------------------
>
> End of ARM-allstar Digest, Vol 91, Issue 4
> ******************************************
More information about the ARM-allstar
mailing list