[arm-allstar] Shutdown Script to Broadcast a QRT Message

[Doug Crompton]

Steve,

 At the end of the shutdown script - /usr/local/sbin/shutdown_monitor.sh
are the lines -

# Play shutdown message
/usr/bin/asterisk -rx "rpt localplay $NODE1 /usr/local/sbin/powerdown"
sleep 5
/usr/bin/poweroff

Where it plays a pre-made powerdown audio file. You can change that file to
whatever you want. I would rename the powerdown.wav file to
powerdown.wav.old then create a new powerdown.wav or powerdown.ul file with
your audio.  If it is longer than the 5 seconds or so be sure to change the
sleep to longer.  While there is no guarantee that the file would not be
overwritten in the future it is not likely. You can always save a backup
copy.

*73 Doug, WA3DSP*
*http://wa3dsp.org <http://wa3dsp.org>*



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Wed, May 20, 2020 at 4:44 PM "Steve Matzura via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I was thinking about writing such a thing. Are there any points in the
> shutdown sequence that would allow for insertion of a custom script? If
> the answer is no, then I won't bother, as it would probably be
> overwritten on the next update.
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>