[arm-allstar] TX Timeout "when" connected ??

[Gervais Fillion]

Hi Doug

my PA become so hot here that i need a protection for that PA so i was sure in the software there was a line somewhere,
now i must translate 4 min 30 second in millisecond,, :-)

thanks for response it certainly was appreciated.

73
great week end

gervais,ve2ckn



________________________________
De : ARM-allstar <arm-allstar-bounces at hamvoip.org> de la part de "Doug Crompton via ARM-allstar" <arm-allstar at hamvoip.org>
Envoyé : 16 mai 2020 10:18
À : ARM Allstar <arm-allstar at hamvoip.org>
Cc : Doug Crompton <wa3dsp at gmail.com>
Objet : Re: [arm-allstar] TX Timeout "when" connected ??

Gervais,

   There are two timeouts defined in rpt.conf. TX and RX. They are in
milliseconds. Typical settings are shown below. In addition you may have a
hardware TX timeout in your transmitter or transceiver.  The rx_timeout I
believe is the one you are requiring. This would timeout if the COS was
held open for an extended time. Obviously this needs to be longer than the
tx_timeout as it would also time out if someone was talking that long. This
would be used in conjunction with rx_cosflap.

tx_timeout=240000

rx_timeout=300000
                                ; Timeout on hardware COS. Used to avoid
hangup
                                ; of circuits with COS lockup.

rx_cosflap=20
                                ; Minimum COS Timeout reset period. Used to
                                ; avoid re-setting of rx_timeout with a
flapping
                                ; squelch.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sat, May 16, 2020 at 8:29 AM "Gervais Fillion via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> hi all
>
> is there any adjustment to add/modify a value at a "TX Timeout" so if  my
> node stay ON TX for,,,lets say 300 second it would autonatically disconnect
> from who ever it is connected too???(where it is located? )
>
> it's a question of protecting my tx radio here,it is a protection for an
> open squelch too .
>
> thanks for the help
>
> Great week end all
>
> Gef
> ve2ckn
>
>
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org