[arm-allstar] Off topic

[David McGough]

Don,

I think I misunderstood what you were attempting, too.  So, directly ATA
to ATA, no asterisk.  Yes, some adapters will allow this by directly
"dialing" the IP address of the of the 2nd ATA, from the 1st ATA. Some of
the Grandstream ATA's would allow this. I tried this for testing, but
nothing more. Also, let me mention that this is a bit of ancient history;  
I haven't used an HT-386 in probably 10 years.  A concern with exposing
old hardware directly to the Internet would be the likelihood there will be 
exploitable vulnerabilities---so, take that into consideration.


73, David KB4FXC



On Sat, 21 Mar 2020, "Don Ritchie via ARM-allstar" wrote:

> Doug,
> 
> Someone else suggested "hamshack hotline", they use an asterisk in the 
> cloud.
> 
> That's where that comment came from.
> 
> We are trying to do it without an asterisk ( read pi) anyplace, just ATA's.
> 
> Thanks
> 
> Don
> 
> 
> On 3/20/2020 23:34, "Doug Crompton via ARM-allstar" wrote:
> > There is NO asterisk in the cloud the way I proposed it! Just point to
> > point Asterisk period.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> > On Fri, Mar 20, 2020 at 11:18 PM "Don Ritchie via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> >> We are both on Ham shack hot line, that's what makes us think we can do it
> >>
> >> without the "Asterisk in the cloud" that Ham shack hot line uses..
> >>
> >> Thanks
> >>
> >> On 3/20/2020 22:58, "Danny K5CG via ARM-allstar" wrote:
> >>> This might work for you  https://hamshackhotline.com/
> >>>
> >>>
> >>> ----- Original Message -----
> >>> From: "ARM Allstar" <arm-allstar at hamvoip.org>
> >>> To: "ARM Allstar" <arm-allstar at hamvoip.org>
> >>> Cc: "Don Ritchie" <k8zgw at twc.com>
> >>> Sent: Friday, March 20, 2020 4:25:06 PM
> >>> Subject: [arm-allstar] Off topic
> >>>
> >>> This may be a little off topic, but I'll run this up the "flag pole"
> >>>
> >>> We, myself ( in OH ) and a friend in Florida were talking the
> >>> possibility of a "intercom" using a couple of
> >>>
> >>> linksys or Cisco ATA's. wondering if it's possible  to connect directly
> >>> OR will we need a "server" at one end ( Pi running Asterisk )?
> >>>
> >>> Thanks
> >>>
> >> --
> >> _______________________________________________
> >>
> >> ARM-allstar mailing list
> >> ARM-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>