[arm-allstar] ARM-allstar Digest, Vol 70, Issue 1

James Hause hausejd at gmail.com
Sun Mar 1 17:17:12 EST 2020 

Just a comment, I believe if all of those nodes are behind the same
firewall, you need to have different iaxport number assignments???
This has a long thread of responses, didn't read through them all to see if
all nodes were behind the same firewall.


On Sun, Mar 1, 2020 at 4:00 PM "Sean via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> All nodes have internet access, and yes, please get me registrations for
> nodes 507261 through 507265.  All ports are standard 4569, thank you!
>
> On Sun, Mar 1, 2020 at 11:13 AM "Doug Crompton via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Sean,
> >
> >  The very first thing you need to do is get hamvoip registrations. The
> > Allstar registration server is unreliable. Since we have your node number
> > we can send you registrations. When you get them they go into the
> iax.conf
> > file either before or after the current registration. Leave the current
> one
> > in. The port in the Hamvoip registration needs to be the same port as
> your
> > iax.conf bindport setting.  I am assuming these nodes all have Internet
> > access?? If not then you will need to do you own routing between nodes
> with
> > hard routes in rpt.conf.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> > On Sun, Mar 1, 2020 at 1:59 PM "Sean via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Good morning Doug, thanks for the reply.
> > >
> > > Nodes 507262, 3 and 4 are connected to 507261 creating a linked system
> > > running simplex links with Alinco DR135 radios.  Node 507264 is behind
> > NAT,
> > > so when it has an issue I have to reconnect it using DTMF.  Twice now,
> > when
> > > it has dropped and I send it the DTMF command to connect to 50761
> > > (*73507261) it replies with "node 507264 repeater mode only" and will
> not
> > > connect.  Last time this happened a couple of months ago I ended up
> just
> > > reflashing the SD because it was a faster way of doing it.  Since it
> has
> > > happened again, I am trying to figure out why.
> > >
> > > Oddly, another issue has developed while working on the system.  I took
> > > them all down for updates, and today all nodes refuse commands to
> connect
> > > to anything.  Whether supermon or command line,  Commands to connect to
> > any
> > > other node are just ignored.  Is there a server outage maybe?  All
> nodes
> > > are green on the nodelist.  It looks like my problems are compounding
> > lol.
> > >
> > > All the nodes are setup pretty straight forward with the download & go
> > > hamvoip on Pi3's.
> > >
> > > On Sun, Mar 1, 2020 at 9:00 AM <arm-allstar-request at hamvoip.org>
> wrote:
> > >
> > > > Send ARM-allstar mailing list submissions to
> > > >         arm-allstar at hamvoip.org
> > > >
> > > > To subscribe or unsubscribe via the World Wide Web, visit
> > > >
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > or, via email, send a message with subject or body 'help' to
> > > >         arm-allstar-request at hamvoip.org
> > > >
> > > > You can reach the person managing the list at
> > > >         arm-allstar-owner at hamvoip.org
> > > >
> > > > When replying, please edit your Subject line so it is more specific
> > > > than "Re: Contents of ARM-allstar digest..."
> > > >
> > > >
> > > > Today's Topics:
> > > >
> > > >    1. Repeater Only Mode (Sean)
> > > >    2. Re: Repeater Only Mode (Doug Crompton)
> > > >    3. G7RPG MicroHub and Unknown Wi-Fi (Chris Smart)
> > > >    4. Re: G7RPG MicroHub and Unknown Wi-Fi (Doug Crompton)
> > > >    5. Re: G7RPG MicroHub and Unknown Wi-Fi (Chris Smart)
> > > >    6. Re: G7RPG MicroHub and Unknown Wi-Fi (Chris Smart)
> > > >    7. Re: G7RPG MicroHub and Unknown Wi-Fi (David Ranch)
> > > >    8. Re: G7RPG MicroHub and Unknown Wi-Fi (Patrick Perdue)
> > > >
> > > >
> > > >
> ----------------------------------------------------------------------
> > > >
> > > > Message: 1
> > > > Date: Sat, 29 Feb 2020 08:52:43 -0800
> > > > From: Sean <seanrarey at gmail.com>
> > > > To: arm-allstar at hamvoip.org
> > > > Subject: [arm-allstar] Repeater Only Mode
> > > > Message-ID:
> > > >         <CALcguq17ELcjzNbQcju=
> > > > M7h0fzn0xUvkbLHkiRcQ1UEFFwWQDQ at mail.gmail.com>
> > > > Content-Type: text/plain; charset="UTF-8"
> > > >
> > > > I feel like this is a dumb question, that I am missing something, but
> > > > cannot find the answer phrased in a way that I can understand, so
> > asking
> > > > for help.
> > > >
> > > > I have one node (of 5 connected simplex nodes) that keeps
> disconnecting
> > > > from the hub.  When I try to re-connect it, it refuses, saying that
> it
> > is
> > > > in "Repeater Only" mode.
> > > >
> > > > It is my guess that somebody is assigning this mode using the DTMF
> > > command,
> > > > but I am not seeing that command on the defined functions page.  My
> > guess
> > > > is that I am not looking at the right thing.
> > > >
> > > > What is the command I am looking for?
> > > >
> > > > Sean
> > > >
> > > >
> > > > ------------------------------
> > > >
> > > > Message: 2
> > > > Date: Sat, 29 Feb 2020 14:54:53 -0500
> > > > From: Doug Crompton <wa3dsp at gmail.com>
> > > > To: ARM Allstar <arm-allstar at hamvoip.org>
> > > > Subject: Re: [arm-allstar] Repeater Only Mode
> > > > Message-ID:
> > > >         <
> > > > CAMp6vsu3aAfsuu5f9nyaQYb_x53Hkpgcm6J_b-yzXVcovRYDHg at mail.gmail.com>
> > > > Content-Type: text/plain; charset="UTF-8"
> > > >
> > > > Sean,
> > > >
> > > >  I really don't have enough info to determine what is going on.
> Usually
> > > > when this happens there is some kind of loop going  where you have
> that
> > > > node already connected to the other through a different path. Exactly
> > > what
> > > > are you connecting with node numbers?
> > > >
> > > >
> > > > *73 Doug*
> > > >
> > > > *WA3DSP*
> > > >
> > > > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio
> >*
> > > >
> > > > On Sat, Feb 29, 2020 at 2:30 PM "Sean via ARM-allstar" <
> > > > arm-allstar at hamvoip.org> wrote:
> > > >
> > > > > I feel like this is a dumb question, that I am missing something,
> but
> > > > > cannot find the answer phrased in a way that I can understand, so
> > > asking
> > > > > for help.
> > > > >
> > > > > I have one node (of 5 connected simplex nodes) that keeps
> > disconnecting
> > > > > from the hub.  When I try to re-connect it, it refuses, saying that
> > it
> > > is
> > > > > in "Repeater Only" mode.
> > > > >
> > > > > It is my guess that somebody is assigning this mode using the DTMF
> > > > command,
> > > > > but I am not seeing that command on the defined functions page.  My
> > > guess
> > > > > is that I am not looking at the right thing.
> > > > >
> > > > > What is the command I am looking for?
> > > > >
> > > > > Sean
> > > > > _______________________________________________
> > > > >
> > > > > ARM-allstar mailing list
> > > > > ARM-allstar at hamvoip.org
> > > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > >
> > > > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > > > >
> > > >
> > > >
> > > > ------------------------------
> > > >
> > > > Message: 3
> > > > Date: Sat, 29 Feb 2020 15:19:52 -0500
> > > > From: Chris Smart <csmart8 at cogeco.ca>
> > > > To: arm-allstar at hamvoip.org
> > > > Subject: [arm-allstar] G7RPG MicroHub and Unknown Wi-Fi
> > > > Message-ID: <mailman.2.1583082001.21394.arm-allstar at hamvoip.org>
> > > > Content-Type: text/plain; charset="us-ascii"; format=flowed
> > > >
> > > > Hi folks.
> > > >
> > > > Just to make sure I'm not missing something...
> > > >
> > > > Is there no way to connect my MicroHub to a new Wi-Fi network, one
> > > > whose SSID isn't known yet?
> > > > For example, I'm going to another country tomorrow, and while the
> > > > place I'm staying has Wi-Fi, I won't know the SSID and password until
> > > > I get there.
> > > >
> > > > I'm looking at wpa_supplicant_custom-wlan0.conf
> > > > and that seems to let me set up known SSID's...
> > > >
> > > > Thanks for any hints,
> > > >
> > > > Chris
> > > > ve3rwj
> > > >
> > > >
> > > > ----------------------------------------
> > > > Check out The Making Better podcast, interviewing some of the world's
> > > > finest thinkers, discussing an optimistic vision of the future.
> > > > https://www.makingbetterpod.com/
> > > >
> > > >
> > > >
> > > > ------------------------------
> > > >
> > > > Message: 4
> > > > Date: Sat, 29 Feb 2020 15:47:24 -0500
> > > > From: Doug Crompton <wa3dsp at gmail.com>
> > > > To: ARM Allstar <arm-allstar at hamvoip.org>
> > > > Subject: Re: [arm-allstar] G7RPG MicroHub and Unknown Wi-Fi
> > > > Message-ID:
> > > >         <CAMp6vsuLnhorqJOR4X_mik=
> > > > 41M+4RMZG0sLkFe6eBB-97K9Lhg at mail.gmail.com>
> > > > Content-Type: text/plain; charset="UTF-8"
> > > >
> > > > Chris,
> > > >
> > > >  Assuming it is using the standard Hamvoip software the wifi option
> in
> > > the
> > > > main menu (item 7) allows you to program an SSID either by scanning
> or
> > by
> > > > manually entering. Then you enter the pass phrase. Of course you
> need a
> > > way
> > > > to do that so initially you would need to use a monitor and keyboard
> or
> > > > Ethernet connection to log in.
> > > >
> > > >
> > > > *73 Doug*
> > > >
> > > > *WA3DSP*
> > > >
> > > > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio
> >*
> > > >
> > > > On Sat, Feb 29, 2020 at 3:30 PM "Chris Smart via ARM-allstar" <
> > > > arm-allstar at hamvoip.org> wrote:
> > > >
> > > > > Hi folks.
> > > > >
> > > > > Just to make sure I'm not missing something...
> > > > >
> > > > > Is there no way to connect my MicroHub to a new Wi-Fi network, one
> > > > > whose SSID isn't known yet?
> > > > > For example, I'm going to another country tomorrow, and while the
> > > > > place I'm staying has Wi-Fi, I won't know the SSID and password
> until
> > > > > I get there.
> > > > >
> > > > > I'm looking at wpa_supplicant_custom-wlan0.conf
> > > > > and that seems to let me set up known SSID's...
> > > > >
> > > > > Thanks for any hints,
> > > > >
> > > > > Chris
> > > > > ve3rwj
> > > > >
> > > > >
> > > > > ----------------------------------------
> > > > > Check out The Making Better podcast, interviewing some of the
> world's
> > > > > finest thinkers, discussing an optimistic vision of the future.
> > > > > https://www.makingbetterpod.com/
> > > > >
> > > > > _______________________________________________
> > > > >
> > > > > ARM-allstar mailing list
> > > > > ARM-allstar at hamvoip.org
> > > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > >
> > > > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > > > >
> > > >
> > > >
> > > > ------------------------------
> > > >
> > > > Message: 5
> > > > Date: Sat, 29 Feb 2020 15:53:30 -0500
> > > > From: Chris Smart <csmart8 at cogeco.ca>
> > > > To: ARM Allstar <arm-allstar at hamvoip.org>
> > > > Subject: Re: [arm-allstar] G7RPG MicroHub and Unknown Wi-Fi
> > > > Message-ID: <mailman.3.1583082001.21394.arm-allstar at hamvoip.org>
> > > > Content-Type: text/plain; charset="us-ascii"; format=flowed
> > > >
> > > > hmm ok perhaps I can do that by opening the box... there are no
> > > > connections besides DC power on the outside.
> > > > Here's what I'm running:
> > > > https://www.hubnetwork.uk/g7rpg-microhub
> > > >
> > > >
> > > > At 03:47 PM 2/29/2020, you wrote:
> > > > >Chris,
> > > > >
> > > > >  Assuming it is using the standard Hamvoip software the wifi option
> > in
> > > > the
> > > > >main menu (item 7) allows you to program an SSID either by scanning
> or
> > > by
> > > > >manually entering. Then you enter the pass phrase. Of course you
> need
> > a
> > > > way
> > > > >to do that so initially you would need to use a monitor and keyboard
> > or
> > > > >Ethernet connection to log in.
> > > > >
> > > > >
> > > > >*73 Doug*
> > > > >
> > > > >*WA3DSP*
> > > > >
> > > > >*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio
> >*
> > > > >
> > > > >On Sat, Feb 29, 2020 at 3:30 PM "Chris Smart via ARM-allstar" <
> > > > >arm-allstar at hamvoip.org> wrote:
> > > > >
> > > > > > Hi folks.
> > > > > >
> > > > > > Just to make sure I'm not missing something...
> > > > > >
> > > > > > Is there no way to connect my MicroHub to a new Wi-Fi network,
> one
> > > > > > whose SSID isn't known yet?
> > > > > > For example, I'm going to another country tomorrow, and while the
> > > > > > place I'm staying has Wi-Fi, I won't know the SSID and password
> > until
> > > > > > I get there.
> > > > > >
> > > > > > I'm looking at wpa_supplicant_custom-wlan0.conf
> > > > > > and that seems to let me set up known SSID's...
> > > > > >
> > > > > > Thanks for any hints,
> > > > > >
> > > > > > Chris
> > > > > > ve3rwj
> > > > > >
> > > > > >
> > > > > > ----------------------------------------
> > > > > > Check out The Making Better podcast, interviewing some of the
> > world's
> > > > > > finest thinkers, discussing an optimistic vision of the future.
> > > > > > https://www.makingbetterpod.com/
> > > > > >
> > > > > > _______________________________________________
> > > > > >
> > > > > > ARM-allstar mailing list
> > > > > > ARM-allstar at hamvoip.org
> > > > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > > >
> > > > > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > > > > >
> > > > >_______________________________________________
> > > > >
> > > > >ARM-allstar mailing list
> > > > >ARM-allstar at hamvoip.org
> > > > >http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > >
> > > > >Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > > >
> > > >
> > > >
> > > > ------------------------------
> > > >
> > > > Message: 6
> > > > Date: Sat, 29 Feb 2020 15:58:58 -0500
> > > > From: Chris Smart <csmart8 at cogeco.ca>
> > > > To: ARM Allstar <arm-allstar at hamvoip.org>
> > > > Subject: Re: [arm-allstar] G7RPG MicroHub and Unknown Wi-Fi
> > > > Message-ID: <mailman.4.1583082001.21394.arm-allstar at hamvoip.org>
> > > > Content-Type: text/plain; charset="us-ascii"; format=flowed
> > > >
> > > >
> > > > >
> > > > >At 03:47 PM 2/29/2020, Doug wrote:
> > > > >>Of course you need a way to do that so initially you would need to
> > > > >>use a monitor and keyboard or Ethernet connection to log in.
> > > >
> > > > Possibly dense question here but there is no way to do that from an
> > > iPhone?
> > > >
> > > > Otherwise, Peter's node works great. But, next time I think I'll look
> > > > for something more flexible in that one area, if such exists.
> > > >
> > > >
> > > >
> > > >
> > > > ------------------------------
> > > >
> > > > Message: 7
> > > > Date: Sat, 29 Feb 2020 14:32:09 -0800
> > > > From: David Ranch <arm-hamvoip at trinnet.net>
> > > > To: ARM Allstar <arm-allstar at hamvoip.org>
> > > > Subject: Re: [arm-allstar] G7RPG MicroHub and Unknown Wi-Fi
> > > > Message-ID: <8e1c7825-b5d9-5681-130e-ebad9b8ef56a at trinnet.net>
> > > > Content-Type: text/plain; charset=windows-1252; format=flowed
> > > >
> > > >
> > > > I'm not familiar with the Microhub device but if your unit has
> > bluetooth
> > > > serial support (Rpi Zero-W, 3, 3+, or 4 have support built-in) or
> > > > alternatively connect a USB to Bluetooth serial adapter to the Pi,
> you
> > > > could then use a bluetooth serial terminal program on a smart phone.
> > > >  From there, you could log into the Pi's serial console and configure
> > > > things via the commands line.
> > > >
> > > > --David
> > > > KI6ZHD
> > > >
> > > >
> > > >
> > > > On 02/29/2020 12:53 PM, "Chris Smart via ARM-allstar" wrote:
> > > > > hmm ok perhaps I can do that by opening the box... there are no
> > > > > connections besides DC power on the outside.
> > > > > Here's what I'm running:
> > > > > https://www.hubnetwork.uk/g7rpg-microhub
> > > > >
> > > > >
> > > > > At 03:47 PM 2/29/2020, you wrote:
> > > > >> Chris,
> > > > >>
> > > > >>  Assuming it is using the standard Hamvoip software the wifi
> option
> > > > >> in the
> > > > >> main menu (item 7) allows you to program an SSID either by
> scanning
> > > > >> or by
> > > > >> manually entering. Then you enter the pass phrase. Of course you
> > need
> > > > >> a way
> > > > >> to do that so initially you would need to use a monitor and
> keyboard
> > > or
> > > > >> Ethernet connection to log in.
> > > > >>
> > > > >>
> > > > >> *73 Doug*
> > > > >>
> > > > >> *WA3DSP*
> > > > >>
> > > > >> *http://www.crompton.com/hamradio <
> http://www.crompton.com/hamradio
> > >*
> > > > >>
> > > > >> On Sat, Feb 29, 2020 at 3:30 PM "Chris Smart via ARM-allstar" <
> > > > >> arm-allstar at hamvoip.org> wrote:
> > > > >>
> > > > >> > Hi folks.
> > > > >> >
> > > > >> > Just to make sure I'm not missing something...
> > > > >> >
> > > > >> > Is there no way to connect my MicroHub to a new Wi-Fi network,
> one
> > > > >> > whose SSID isn't known yet?
> > > > >> > For example, I'm going to another country tomorrow, and while
> the
> > > > >> > place I'm staying has Wi-Fi, I won't know the SSID and password
> > > until
> > > > >> > I get there.
> > > > >> >
> > > > >> > I'm looking at wpa_supplicant_custom-wlan0.conf
> > > > >> > and that seems to let me set up known SSID's...
> > > > >> >
> > > > >> > Thanks for any hints,
> > > > >> >
> > > > >> > Chris
> > > > >> > ve3rwj
> > > >
> > > >
> > > >
> > > > ------------------------------
> > > >
> > > > Message: 8
> > > > Date: Sat, 29 Feb 2020 19:55:44 -0500
> > > > From: Patrick Perdue <borrisinabox at gmail.com>
> > > > To: David Ranch via ARM-allstar <arm-allstar at hamvoip.org>
> > > > Subject: Re: [arm-allstar] G7RPG MicroHub and Unknown Wi-Fi
> > > > Message-ID: <a9c6d8cb-be48-1466-b32e-46404da26758 at gmail.com>
> > > > Content-Type: text/plain; charset=utf-8; format=flowed
> > > >
> > > > I don't know of a fully functional and accessible (voiceover)
> Bluetooth
> > > > terminal on iOS, but yes, that should work, in theory. There is this
> > > > one, but I've not tested it.
> > > > https://apps.apple.com/us/app/bluterm-serial-terminal/id1043611281
> > > >
> > > > You'd have to configure TTY for bluetooth on the Pi first.
> > > >
> > > > Terminal apps on iOS are generally not awesome to use with voiceover,
> > > > with some exceptions, like Ish, and the old, now sadly discontinued
> > > > Prompt. Ish is an implementation of Alpine Linux for iOS, by the way.
> > > >
> > > > You could also, with some scripting, have the rPi offer itself as an
> > > > access point when no known networks are detected. You could then
> > connect
> > > > to that with some device to give you SSH access long enough to scan
> for
> > > > or manually add a network, and reboot. There are some potential
> > problems
> > > > with this approach, such as, if you go out of range of a known
> network,
> > > > or if the connection drops long enough for any given reason, it will
> > > > drop and probably never reconnect again until the next reboot.
> > > >
> > > > I'm not sure what you would do about captive portals, though, if you
> > > > only have access to text terminals, as we do. Xterm is not an option
> > for
> > > > us blind folks. Elunx in a terminal window?
> > > >
> > > >
> > > >
> > > > On 2/29/2020 5:32 PM, "David Ranch via ARM-allstar" wrote:
> > > > >
> > > > > I'm not familiar with the Microhub device but if your unit has
> > > > > bluetooth serial support (Rpi Zero-W, 3, 3+, or 4 have support
> > > > > built-in) or alternatively connect a USB to Bluetooth serial
> adapter
> > > > > to the Pi, you could then use a bluetooth serial terminal program
> on
> > a
> > > > > smart phone.? From there, you could log into the Pi's serial
> console
> > > > > and configure things via the commands line.
> > > > >
> > > > > --David
> > > > > KI6ZHD
> > > > >
> > > > >
> > > > >
> > > > > On 02/29/2020 12:53 PM, "Chris Smart via ARM-allstar" wrote:
> > > > >> hmm ok perhaps I can do that by opening the box... there are no
> > > > >> connections besides DC power on the outside.
> > > > >> Here's what I'm running:
> > > > >> https://www.hubnetwork.uk/g7rpg-microhub
> > > > >>
> > > > >>
> > > > >> At 03:47 PM 2/29/2020, you wrote:
> > > > >>> Chris,
> > > > >>>
> > > > >>> ?Assuming it is using the standard Hamvoip software the wifi
> option
> > > > >>> in the
> > > > >>> main menu (item 7) allows you to program an SSID either by
> scanning
> > > > >>> or by
> > > > >>> manually entering. Then you enter the pass phrase. Of course you
> > > > >>> need a way
> > > > >>> to do that so initially you would need to use a monitor and
> > keyboard
> > > or
> > > > >>> Ethernet connection to log in.
> > > > >>>
> > > > >>>
> > > > >>> *73 Doug*
> > > > >>>
> > > > >>> *WA3DSP*
> > > > >>>
> > > > >>> *http://www.crompton.com/hamradio <
> > http://www.crompton.com/hamradio
> > > >*
> > > > >>>
> > > > >>> On Sat, Feb 29, 2020 at 3:30 PM "Chris Smart via ARM-allstar" <
> > > > >>> arm-allstar at hamvoip.org> wrote:
> > > > >>>
> > > > >>> > Hi folks.
> > > > >>> >
> > > > >>> > Just to make sure I'm not missing something...
> > > > >>> >
> > > > >>> > Is there no way to connect my MicroHub to a new Wi-Fi network,
> > one
> > > > >>> > whose SSID isn't known yet?
> > > > >>> > For example, I'm going to another country tomorrow, and while
> the
> > > > >>> > place I'm staying has Wi-Fi, I won't know the SSID and password
> > > until
> > > > >>> > I get there.
> > > > >>> >
> > > > >>> > I'm looking at wpa_supplicant_custom-wlan0.conf
> > > > >>> > and that seems to let me set up known SSID's...
> > > > >>> >
> > > > >>> > Thanks for any hints,
> > > > >>> >
> > > > >>> > Chris
> > > > >>> > ve3rwj
> > > > >
> > > > > _______________________________________________
> > > > >
> > > > > ARM-allstar mailing list
> > > > > ARM-allstar at hamvoip.org
> > > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > >
> > > > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > > >
> > > >
> > > > ------------------------------
> > > >
> > > > Subject: Digest Footer
> > > >
> > > > _______________________________________________
> > > > ARM-allstar mailing list
> > > > ARM-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > >
> > > > ------------------------------
> > > >
> > > > End of ARM-allstar Digest, Vol 70, Issue 1
> > > > ******************************************
> > > >
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>

More information about the ARM-allstar mailing list