[arm-allstar] New and connections

[Doug Crompton]

John,

 First of all I see you are using 6 digit node numbers. This is fine but be
aware and others be aware that you will NOT be able to connect to or from
any nodes in the system that either have not updated or are using older
systems that cannot be updated. This is a significant number of nodes,
maybe 10% to as much as 20% of nodes out there.

Another factor is the remote base problem. IN YOUR CASE THIS IS YOUR
PROBLEM! You are not a remote base and should not have that item checked at
allstarlink.org  Go there and uncheck that. Make sure it has cleared. This
is indicated by a 'y' on the end of domain lookup. Here is what yours looks
like right now -

# dns-query 513960
+OK|radio at 192.81.87.244:4569/513960,192.81.87.244,y
# dns-query 513961
+OK|radio at 192.81.87.244:4569/513961,192.81.87.244,y

Do a dns-query at your end once you have removed the checkbox at
allstarlink.org and things update and you should see no 'y' at the end.
This should fix your problem.

This is important for anyone else reading this. In most every case you
should NOT check remote base at allstarlink.org.  This is a very special
case and when checked things work very differently. Unfortunately this is
not explained at the site so people think it is something they should check.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Tue, Jun 16, 2020 at 12:32 PM "John W. Springman III via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I am a new person on hamvoip all-star with a pi2.  I have 513960 and
> 513961.  Is there a way to see if something is missing.  I have done the
> port forwarding.  I can connect out but some do time out but some.cant
> connect in also.  I also have echolink on 277377 which doesn't seem to
> connect either except maybe out and I have the port forwarding with that
> to.  When I use dvswitch app it says unregistered and I can't seem to get
> that going either.  When I look at the tx and Rx section on the app the Rx
> says 0 bytes and the tx does going up maybe to 8 bytes.
>
>
> John Springman
> KB3AWQ/WQGU515
>
> Sent from Yahoo Mail on Android
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org