[arm-allstar] simpleusb flash tone nominal level

[kg5rdf]

Patrick,Can you explain what the HRI-200 rf interface is connected to (URI?) and if it is connected to the server in Japan. That would help me better understand the configuration.Thanks David KG5RDF 
-------- Original message --------From: Patrick Perdue via ARM-allstar <arm-allstar at hamvoip.org> Date: 7/10/20  3:04 AM  (GMT-06:00) To: Don Backstrom - AA7AU via ARM-allstar <arm-allstar at hamvoip.org> Cc: Patrick Perdue <borrisinabox at gmail.com> Subject: [arm-allstar] simpleusb flash tone nominal level Hi:I'm setting up a HamVoIP node using a Yaesu HRI-200 connected to a URI-X. I have no other Yaesu equipment, so I can't monitor what comes out of my Allstar node into the HRI-200.I can, however, read meters on the host machine.Currently, I have everything calibrated such that the test tone hits the input of the HRI-200 at just a little above -6DB. I know that tone is pretty hot, but I don't know what value I should aim for to get as close to a 1:1 ratio as possible, perhaps with a little headroom. Should I be using something closer to -6, or 0 as a reference?Thanks and 73deKE4DYI_______________________________________________ARM-allstar mailing listARM-allstar at hamvoip.orghttp://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstarVisit the BBB and RPi2/3/4 web page - http://hamvoip.org