[arm-allstar] Password doesn't work anymore

[Doug Crompton]

The supermon password and the ssh password are two different passwords.
While they could be the same if you made then that way they could also be
different if you used different ones for each. Also remember login username
to ssh is ALWAYS  'root'  If you don't specify that or you specify some
other name you will not be able to log in.

Worst case a howto on how to change your password is in the hamvoip.org
howto software section. It is a little involved but if you follow it you
can save your system. The other option is to just start over with a new SD
card and reload everything.

Passwords don't change unless you change them. It is conceivable but highly
unlikely that it is in some way corrupted.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Mon, Jul 6, 2020 at 4:23 PM "R I via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I've had node running for a while. Using Putty or WinSCP I could always
> login.Now they both claim password it incorrect. I tried other possible
> passwords that I use but nothing works.I can only login via supermon but
> nothing else. Node still running but I wanted to make some changes.
> Was it latest update, I'm lost.
> Raul
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>