[arm-allstar] wireline tone control of repeater

[c b]

Thanks for replying, the tone  PTT is not necessary, as that can be done
with hardware e&m stile.

i will look at the COP 48 thank you

Chris

On Wed, Jan 29, 2020 at 5:27 AM David McGough <kb4fxc at inttek.net> wrote:

>
> Chris,
>
> HamVoIP/AllStar can generate arbitrary tones, for example using the COP 48
> command. Does your systems need function tones every time PTT is asserted?
> If not, I think COP 48 tone generation would work. If you do need function
> tones with every key-up, a AllStar macro -might- work?
>
> Generating a continuous guard tone will be a problem, I think, with the
> current software....I'll think about that some more.  Do you need the
> guard tone to remain present during transmissions?
>
>
> 73, David KB4FXC
>
>
>
>
> On Tue, 28 Jan 2020, "c b via ARM-allstar" wrote:
>
> > Brian
> >
> > you exactly nailed it, the ptt is not much of a concern as it can be done
> > e&m style but the ability to change channels would be great.
> >
> > i was hoping someone already thought of this.
> >
> > thank you for your time
> >
> > On Tue, Jan 28, 2020 at 4:19 PM "Brian Swann via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Doug,
> > >
> > > The way I read his request, he's looking for Tone Remote Control (TRC)
> > > which is an older analog standard for commercial radios. Typically a
> normal
> > > channel 1 keyup is 120ms of "High Level Guard Tone", which is 2175hz,
> > > immediately followed by 40ms of the F1 "Function Tone" which is 1950hz.
> > > Then the voice is gated through, and a continuous "Low Level Guard
> Tone" at
> > > a level of -30db (compared to full voice modulation) is sent along
> with the
> > > voice. The LLGT keeps the transmitter keyed. The transmitter drops out
> when
> > > the LLGT disappears.
> > >
> > > By using different function tones, you can change channels, or
> transmit PL
> > > stripped, or do other functions. Most base stations were fairly simple
> and
> > > didn't implement too many different functions.
> > >
> > > I don't think this is implemented in Hamvoip, although it might be. I
> don't
> > > think it would be very difficult to add in. The advantage would be
> that a
> > > lot of commercial surplus base stations speak this "language" by
> default.
> > >
> > > More info in the Wikipedia article
> > > https://en.wikipedia.org/wiki/Tone_remote
> > >
> > > Tone remotes send commands to a base station using *function tones*, a
> > > series of two tones in sequence. The first tone is 2,175 Hz and is
> 100-300
> > > milliseconds in length.[6]
> > > <https://en.wikipedia.org/wiki/Tone_remote#cite_note-6> The most
> common
> > > second tone is 1,950 Hz. The most commonly used tone sequence in tone
> > > remote controls is the channel 1 transmit command. The default for this
> > > command consists of a high-level 2,175 Hz followed by a lower-level
> > > 1,950 Hz. A continuous, low-level 2,175 Hz tone follows. Voice is
> > > multiplexed over the tone. So long as the 2,175 Hz tone is present, the
> > > transmitter remains on. An audio notch filter
> > > <https://en.wikipedia.org/wiki/Notch_filter> removes the 2,175 Hz
> > > low-level
> > > tone from the actual transmit audio. General Electric Mobile Radio
> called
> > > the high-level tone, '"Secur-it tone", and called the low-level tone
> "hold
> > > tone." In the industry, the low-level continuous tone is often called,
> > > *low-level
> > > guard tone*. The low-level tone is present at the same time as
> transmitted
> > > voice.
> > >
> > > Brian
> > > n1bs
> > >
> > > On Tue, Jan 28, 2020 at 5:53 PM "Doug Crompton via ARM-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > > Chris,
> > > >
> > > >  I am not completely clear on what you want to do but the answer is
> yes
> > > you
> > > > can control a capable rig either through hardware or CAT control to
> > > change
> > > > frequency and other things using DTMF. See the howto on this at the
> > > > hamvoip.org web page which explains how to use GPIO bits to control
> BCD
> > > > channel changes on capable radios. Hamvoip also has hamlib installed
> and
> > > > using rigctl commands you can control many radios. It is up to the
> user
> > > to
> > > > implement this. Do  rigclt -l    at the Linux prompt to see all the
> > > > currently controllable rigs.
> > > >
> > > >
> > > > *73 Doug*
> > > >
> > > > *WA3DSP*
> > > >
> > > > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio
> >*
> > > >
> > > > On Tue, Jan 28, 2020 at 11:09 AM "c b via ARM-allstar" <
> > > > arm-allstar at hamvoip.org> wrote:
> > > >
> > > > > does allaratlink support tone control of a station?
> > > > >
> > > > > for instance using 2175 (switching to low level)  to PTT and using
> > > > > different tones to change channel?
> > > > >
> > > > > or at least the ability to send the correct tone to change
> channels via
> > > > > sending DTMF to the to allstar and then allstar sending the tome
> out
> > > the
> > > > > URI to the station?
> > > > >
> > > > > the application would be a continuous duty remoter using a mastr
> iii
> > > and
> > > > > making it multi channel by sending the correct tone to switch
> channels.
> > > > >
> > > > > thanks
> > > > >
> > > > > Chris
> > > > > _______________________________________________
> > > > >
> > > > > ARM-allstar mailing list
> > > > > ARM-allstar at hamvoip.org
> > > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > > >
> > > > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > > > >
> > > > _______________________________________________
> > > >
> > > > ARM-allstar mailing list
> > > > ARM-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > > >
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
>
>