[arm-allstar] wireline tone control of repeater

[Doug Crompton]

Chris,

 I am not completely clear on what you want to do but the answer is yes you
can control a capable rig either through hardware or CAT control to change
frequency and other things using DTMF. See the howto on this at the
hamvoip.org web page which explains how to use GPIO bits to control BCD
channel changes on capable radios. Hamvoip also has hamlib installed and
using rigctl commands you can control many radios. It is up to the user to
implement this. Do  rigclt -l    at the Linux prompt to see all the
currently controllable rigs.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Tue, Jan 28, 2020 at 11:09 AM "c b via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> does allaratlink support tone control of a station?
>
> for instance using 2175 (switching to low level)  to PTT and using
> different tones to change channel?
>
> or at least the ability to send the correct tone to change channels via
> sending DTMF to the to allstar and then allstar sending the tome out the
> URI to the station?
>
> the application would be a continuous duty remoter using a mastr iii and
> making it multi channel by sending the correct tone to switch channels.
>
> thanks
>
> Chris
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>