[arm-allstar] Wunderground API

Wed Jan 15 13:19:20 EST 2020

All, 

Please note Wunderground has discontinued the API and unless you pay big
bucks, you can no longer download you current weather info.

I have a Davis Weather Station, and upload to Weather Link.  Davis has a
free API which I am now using.  This required some simple changes to my wx
script due to the field names in the xml not matching WU names.

It is now working and my repeater spits out latest Wx one hourly IDs.

Anyone interested in my scripts, send me an email.

Dan n5tm

-----Original Message-----
From: ARM-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of
arm-allstar-request at hamvoip.org
Sent: Wednesday, January 15, 2020 11:00
To: arm-allstar at hamvoip.org
Subject: ARM-allstar Digest, Vol 68, Issue 22

Send ARM-allstar mailing list submissions to
	arm-allstar at hamvoip.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
or, via email, send a message with subject or body 'help' to
	arm-allstar-request at hamvoip.org

You can reach the person managing the list at
	arm-allstar-owner at hamvoip.org

When replying, please edit your Subject line so it is more specific than
"Re: Contents of ARM-allstar digest..."

Today's Topics:

   1. Cannot bring autopatch up from radio side, command line OK
      (Seth Miller)
   2. Re: Cannot bring autopatch up from radio side, command line
      OK (Seth Miller)
   3. Re: Weather script updates are out (Maurice Dake)
   4. Re: Weather script updates are out (Doug Crompton)
   5. wx_condition.sh update (Doug Crompton)
   6. Re: DVSwitch on Hamvoip (Doug Crompton)

----------------------------------------------------------------------

Message: 1
Date: Tue, 14 Jan 2020 15:00:49 -0700
From: Seth Miller <N6PLmail at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: [arm-allstar] Cannot bring autopatch up from radio side,
	command line OK
Message-ID:
	<CAEvqoR-WNi244kMnYFecLPB0f90FJamOyPO--q6Rk5fHLHZ9zg at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

I have autopatch set up (via VoIP link to telco service provider) and if I
initiate a call from the Asterisk command line (i.e. 'rpt fun 50xxx
*618004321000') the call completes normally, however if I enter the same
sequence from the radio side I can see each digit being decoded properly but
the call does not initiate, in fact the digits seem to be ignored entirely.
I am not exceeding the max allowed interdigit timing and not sure why the
radio-side attempt is being ignored. Is there a digit termination character
that must be entered or something simple that I am missing?

Thanks

------------------------------

Message: 2
Date: Tue, 14 Jan 2020 18:56:59 -0700
From: Seth Miller <N6PLmail at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] Cannot bring autopatch up from radio side,
	command line OK
Message-ID:
	<CAEvqoR9iKvRb+cXK_1CMRuh+1Jbm0hfUH0S2hVB=YF9k77AdRw at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

Nevermind, found the problem, bad DTMF encoder on the radio being used for
the test. Asterisk was not decoding a single digit in the dial string and I
didn't catch it. Other radios work fine.

On Tue, Jan 14, 2020 at 3:00 PM Seth Miller <N6PLmail at gmail.com> wrote:

> I have autopatch set up (via VoIP link to telco service provider) and 
> if I initiate a call from the Asterisk command line (i.e. 'rpt fun 
> 50xxx
> *618004321000') the call completes normally, however if I enter the 
> same sequence from the radio side I can see each digit being decoded 
> properly but the call does not initiate, in fact the digits seem to be 
> ignored entirely. I am not exceeding the max allowed interdigit timing 
> and not sure why the radio-side attempt is being ignored. Is there a 
> digit termination character that must be entered or something simple that
I am missing?
>
> Thanks
>
>
>

------------------------------

Message: 3
Date: Tue, 14 Jan 2020 22:29:30 -0500
From: "Maurice Dake" <mldake at comcast.net>
To: <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] Weather script updates are out
Message-ID: <DD41DFCE9C744E14BCCFBB5692096CAC at MauriceLapTop>
Content-Type: text/plain;	charset="utf-8"

I previously had temperature and weather conditions reporting each hour by
making the change to my cron- .  I just added the API for my weather station
on Weather Underground to the two files mentioned and now only getting
temperature.  Obviously, there are other changes that I?m not aware of that
calls up weather station data rather than ZIP code weather information.
Where do I call up my weather station data ?  I assume that people that
previously had Weather Underground working already have these changes in
their files.  What am I missing?

------------------------------

Message: 4
Date: Tue, 14 Jan 2020 23:04:48 -0500
From: Doug Crompton <wa3dsp at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] Weather script updates are out
Message-ID:
	<CAMp6vsv3X7doef4jmK99arqDkNCWLiR_Lhoz51r520DO3Lut2g at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

Maurice,

    What you are seeing is correct. There is no weather condition sent from
the weather stations so if you use wunderground in place of zip or airport
code in the hourly you will only get temperature. It has always been that
way. Where you will get a more complete forecast - not for the hourly of
course - is using wx_condition.sh which shows or speaks the data from the
government or underground stations. Just type wx_condition.sh without
parameters to see the options. I am sending out another update notice now so
do an update again before you try it.

*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Tue, Jan 14, 2020 at 10:30 PM "Maurice Dake via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I previously had temperature and weather conditions reporting each 
> hour by making the change to my cron- .  I just added the API for my 
> weather station on Weather Underground to the two files mentioned and 
> now only getting temperature.  Obviously, there are other changes that 
> I?m not aware of that calls up weather station data rather than ZIP 
> code weather information.  Where do I call up my weather station data 
> ?  I assume that people that previously had Weather Underground 
> working already have these changes in their files.  What am I missing?
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org

------------------------------

Message: 5
Date: Tue, 14 Jan 2020 23:11:27 -0500
From: Doug Crompton <wa3dsp at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: [arm-allstar] wx_condition.sh update
Message-ID:
	<CAMp6vsvp=t-91Kwva_h_RmDEfNNgbCEe_Xx51tSBqByBSieOTQ at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

There is another update tonight to fix a few problems in the wx_condition.sh
script. This only effects the script not the .ini files so if you entered
keys they will remain.  Do an update with item 1 in the admin menu.

This fixes some minor bugs associated with the prior release to fix the
wunderground updates.

*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

------------------------------

Message: 6
Date: Wed, 15 Jan 2020 00:36:27 -0500
From: Doug Crompton <wa3dsp at gmail.com>
To: ARM Allstar <arm-allstar at hamvoip.org>
Subject: Re: [arm-allstar] DVSwitch on Hamvoip
Message-ID:
	<CAMp6vsvDGUFX+mvtxSO=gcE5N7VXh-3Pkp+C6-M_L4QeBdp2QQ at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

Patrick,

 Sorry for the delay in answering. I discussed this with Dave and he will be
updating the dvswitch GW SW to the latest binaries and restructuring the
files in the next few days. There will probably be something about it by the
weekend.

*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Mon, Jan 13, 2020 at 10:54 PM "Patrick Perdue via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hi:
>
> I saw some discussion a while back about running DVSwitch on a Hamvoip 
> install. Is this available as a package?
>
> I'm familiar enough with DVSwitch running it on other systems, but I 
> now have cause to want to run it on one of my Hamvoip nodes as a 
> personal
> p25 bridge.
>
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>

------------------------------

Subject: Digest Footer

_______________________________________________
ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

------------------------------

End of ARM-allstar Digest, Vol 68, Issue 22
*******************************************