[arm-allstar] DCS through an Allstar node

[Steve Agee]

John,

Contact K6UFX. The Quantar can be made to switch to a different tone 
with addition of only a one wire hook up. Steve has the details as it is 
already being done.

Thanks,
N5ZUA

On 1/6/2020 12:21 PM, "John Griffith via ARM-allstar" wrote:
> Hello everyone.
> I'd like to take my repeater off the network and go local from time to time
> to call a friend using selective calling.
> My Quantar repeater isn't able to transmit a different PL tone (preferred)
> when switched to local only as the PL tone
> is generated by the repeater, not my Allstar Pi.
>
> If I program my mobile radio to transmit a DCS signal when talking to the
> repeater, will the DCS signal pass through the
> Filters in the Pi and repeater and allow those signals to wake up my
> friend's radio?
>
> Alternatively can the Pi be programmed to emit a different PL tone when in
> local only mode? I know the courtesy
> tone can be made to mimic a PL tone, but it would need to be continuous
> rather than at just the end of the transmission.
>
> John G.
> N7OKN
>
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org