[arm-allstar] Audio problem

[James Hause]

Ok, thanks.

On Tue, Feb 25, 2020 at 4:01 PM David McGough <kb4fxc at inttek.net> wrote:

>
> convert_audio.sh comes pre-installed in the HamVoIP image.
>
>
> On Tue, 25 Feb 2020, "James Hause via ARM-allstar" wrote:
>
> > Hi Doug,
> >    Hey I just checked the Script descriptions document on the Hamvoip
> site,
> > didn't see this convert_audio.sh in there.
> > Has that document been updated lately??
> > Jim
> > KF5LBT
> >
> >
> > On Tue, Feb 25, 2020 at 3:26 PM "Doug Crompton via ARM-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> > > Tim,
> > >
> > >  Use the available script  convert_audio.sh  to do it. Works every
> time for
> > > me.
> > >
> > > # convert_audio.sh
> > >
> > >  Convert wav file to Asterisk/Allstar format
> > >
> > >    convert_audio.sh <input file.wav> [output_filename]
> > >
> > >    Input file must be .wav, output file is input filename.ul
> > >    unless different second parameter filename is given.
> > >
> > >
> > > *73 Doug*
> > >
> > > *WA3DSP*
> > >
> > > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> > >
> > >
> > >
> > > On Tue, Feb 25, 2020 at 4:23 PM "KY220GROUP--- via ARM-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > > > I am running the latest HamVoip release on a RPI3 with a RB-RIM. I
> have
> > > > been changing some of my audio files to a different voice that I've
> found
> > > > online. It has been working great for a couple of weeks so I decided
> to
> > > > change my wx_header.gsm to the new voice. I am recording  the .wav
> file
> > > to
> > > > audacity, mono, sample rate 8000Hz, sample format 16 bit, sample rate
> > > > converter=Best Quality, High Quality conversion= High quality. Then
> using
> > > > winSCP to transfer the file to my node. I then ssh to my server and
> use
> > > the
> > > > following command to convert it to either a .gsm or .ul , whichever I
> > > need.
> > > > sox -V wx_header.wav -r 8000 -c 1 -t ul wx_header.gsm The
> wx_header.gsm
> > > > sounds like it is skipping with only a millisecond of audio every 2-3
> > > > seconds.(attached sample if not stripped) I can play the same file
> as a
> > > > .wav or .ul and they sound good but the .gsm is messed up. I have
> made
> > > > other .gsm files over the last week and they work fine and sound
> good.
> > > Now
> > > > all new GSM files that I create sound the same way as wx_header. If I
> > > play
> > > > the wx_condition.sh KI35 47293 the header and weather sound the same,
> > > > skipping all the way through. I am thinking it may be a rate error
> but
> > > > can't figure out where to start looking  Any suggestions as always
> more
> > > > than appreciated.
> > > >
> > > > 73
> > > > Tim Webb - KK4WH
> > > > https://www.qrz.com/db/KK4WHwww.facebook.com/kentucky220
> > > > _______________________________________________
> > > >
> > > > ARM-allstar mailing list
> > > > ARM-allstar at hamvoip.org
> > > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > > >
> > > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > > _______________________________________________
> > >
> > > ARM-allstar mailing list
> > > ARM-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> > >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
>
>