[arm-allstar] Audio problem

[James Hause]

Hi Doug,
   Hey I just checked the Script descriptions document on the Hamvoip site,
didn't see this convert_audio.sh in there.
Has that document been updated lately??
Jim
KF5LBT


On Tue, Feb 25, 2020 at 3:26 PM "Doug Crompton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Tim,
>
>  Use the available script  convert_audio.sh  to do it. Works every time for
> me.
>
> # convert_audio.sh
>
>  Convert wav file to Asterisk/Allstar format
>
>    convert_audio.sh <input file.wav> [output_filename]
>
>    Input file must be .wav, output file is input filename.ul
>    unless different second parameter filename is given.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>
> On Tue, Feb 25, 2020 at 4:23 PM "KY220GROUP--- via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I am running the latest HamVoip release on a RPI3 with a RB-RIM. I have
> > been changing some of my audio files to a different voice that I've found
> > online. It has been working great for a couple of weeks so I decided to
> > change my wx_header.gsm to the new voice. I am recording  the .wav file
> to
> > audacity, mono, sample rate 8000Hz, sample format 16 bit, sample rate
> > converter=Best Quality, High Quality conversion= High quality. Then using
> > winSCP to transfer the file to my node. I then ssh to my server and use
> the
> > following command to convert it to either a .gsm or .ul , whichever I
> need.
> > sox -V wx_header.wav -r 8000 -c 1 -t ul wx_header.gsm The wx_header.gsm
> > sounds like it is skipping with only a millisecond of audio every 2-3
> > seconds.(attached sample if not stripped) I can play the same file as a
> > .wav or .ul and they sound good but the .gsm is messed up. I have made
> > other .gsm files over the last week and they work fine and sound good.
> Now
> > all new GSM files that I create sound the same way as wx_header. If I
> play
> > the wx_condition.sh KI35 47293 the header and weather sound the same,
> > skipping all the way through. I am thinking it may be a rate error but
> > can't figure out where to start looking  Any suggestions as always more
> > than appreciated.
> >
> > 73
> > Tim Webb - KK4WH
> > https://www.qrz.com/db/KK4WHwww.facebook.com/kentucky220
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>