[arm-allstar] DSTAR Bridge to Allstar Node

[Mike Shelby]

So it's looking like I am going to need some hardware to complete this task, thanks for the help all!

Thanks,

Mike Shelby | K9MLS


________________________________
From: ARM-allstar <arm-allstar-bounces at hamvoip.org> on behalf of "Patrick Perdue via ARM-allstar" <arm-allstar at hamvoip.org>
Sent: Monday, February 10, 2020 1:12 PM
To: Mike Shelby via ARM-allstar <arm-allstar at hamvoip.org>
Cc: Patrick Perdue <borrisinabox at gmail.com>
Subject: Re: [arm-allstar] DSTAR Bridge to Allstar Node

I've done this with DVSwitch, with and without using an XLX reflector.
My node (50631) bridges to both DMR and DSTAR using DVSwitch, XLX and
three AMBE dongles. Two dongles to transcode DMR to DSTAR, and the other
for analog via Allstar to DMR, which bridges to DSTAR through the
reflector. If I only wanted to use one of those digital modes, I would
only need two dongles.


On 2/9/2020 8:01 PM, "Mike Shelby via ARM-allstar" wrote:
> I'm looking at creating a DTSAR bridge for my allstar network, anyone have any luck with creating a bridge?
>
> Thanks,
>
> Mike Shelby | K9MLS
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3/4 web page - http://hamvoip.org