[arm-allstar] GPIO URI

[kg5rdf]

Got it going.Thanks David KG5RDF
-------- Original message --------From: Doug Crompton via ARM-allstar <arm-allstar at hamvoip.org> Date: 2/7/20  10:39 AM  (GMT-06:00) To: ARM Allstar <arm-allstar at hamvoip.org> Cc: Doug Crompton <wa3dsp at gmail.com> Subject: Re: [arm-allstar] GPIO URI How are you turning it on?  You need to initialize in simpleusb.conf -gpio4=out0   -  first. Then in some way turn it on.Example in [events]  stanza -cop,62,GPIO4:1 = c|t|RPT_RXKEYEDcop,62,GPIO4:0 = c|f|RPT_RXKEYEDWhich would turn the bit on with COS and off without.*73 Doug**WA3DSP**http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*On Fri, Feb 7, 2020 at 11:19 AM "kg5rdf via ARM-allstar" <arm-allstar at hamvoip.org> wrote:> I must be missing something. If I set gpio4 to and output, turn it on, and> read status it is activated. On the URI pin 4 I am not seeing 5vdc?Thanks> David KG5RDF> _______________________________________________>> ARM-allstar mailing list> ARM-allstar at hamvoip.org> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar>> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org>_______________________________________________ARM-allstar mailing listARM-allstar at hamvoip.orghttp://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstarVisit the BBB and RPi2/3/4 web page - http://hamvoip.org